P0715 - Input/Turbine Speed Sensor - Toyota Yaris Forums

furinji.saiga · 01-29-2015, 05:26 AM

Well I was honestly surprised myself at that... Two people checked it. The first one replaced the sensor and obtained the same fault. The second one merely had a look and said it's alright. I insisted that they should check more in depth, but to no avail.

However, there was one thing that I observed :

The wiring has already been done two times. First time, there were other trouble codes, the P0715 code was not there, no check engine light, however the gear was stuck only in first and second, no matter how much i accelerate the car.

On second time the wiring was done, the gear would change now, but with a noticeable shake with every gear shift or when i slightly push the acceleration pedal at high speeds. And the P0715 error came in, and check engine lights up.

Does this help ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ABS and "!" lights are ON again!	onizuka	Canada	457	04-28-2023 10:40 AM
Rear Speed Sensor Install Help? (ABS Sensor)	towerofpower	DIY / Maintenance / Service	2	04-07-2014 07:32 PM
The "let's brainstorm how to make a piggyback work" thread	eTiMaGo	Forced Induction Forum	83	08-17-2011 04:54 PM
NEED ENGINE CHECK LIGHT CODE LIST	Attitude	Forced Induction Forum	12	04-11-2011 07:38 PM
Bad Speed Sensor?	dmehak	DIY / Maintenance / Service	33	01-05-2011 10:17 PM

01-29-2015, 05:26 AM	#5
furinji.saiga Drives: Toyota Belta 2006 Join Date: Jan 2015 Location: Mauritius Posts: 4	Well I was honestly surprised myself at that... Two people checked it. The first one replaced the sensor and obtained the same fault. The second one merely had a look and said it's alright. I insisted that they should check more in depth, but to no avail. However, there was one thing that I observed : The wiring has already been done two times. First time, there were other trouble codes, the P0715 code was not there, no check engine light, however the gear was stuck only in first and second, no matter how much i accelerate the car. On second time the wiring was done, the gear would change now, but with a noticeable shake with every gear shift or when i slightly push the acceleration pedal at high speeds. And the P0715 error came in, and check engine lights up. Does this help ?