DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation

[masterpipo1]

Hi !

i did every step for the cruise control stalk, i didnt do any wiring yet cause i dont know if i need to do it.

In the tutorial, they said that i need to look at the D3 Connector here what my panel look like



I think that my D3 connector is no 1. if not , can you guys tell me which connector i need to look at. On this connector , i see the pink and blue wire,i dont see any black wire.

i dont know what is the steering column wire but on the D3 connect, it look like the previous owner of the car cut a remove a wire ( i circled it in red), and i dont know if the white wire sold where the no.2 is , was connected on the D3 Connector.


I dont know what is no.3 black box either. here's what written on the top of that black box.

[IMG][/IMG]

I alos took a picture of where the black box wires are going, but i can't see where they end up.

[IMG][/IMG]

I tried the cruise control switch on the road but i didnt work. The horn's working so i dont think its the cruise control stalk connector.

Can you guys help me out on this please.

thanks you !