How to remove rear drum, stripped holes - Toyota Yaris Forums

naossoan · 09-29-2018, 09:53 PM

so i was able to get the drum off by beating it with a hammer.

I got the stud out by beating it with a hammer as well.

Now how in the hell do I get the new stud in? I got it fished in through the back and through the hole.

I couldn't push it in the hole by hand with the teeth etc so I used a wrench as a washer behind the lug nut and tightened it down with my tire iron.

I am now unable to tighten it anymore while trying to hold the thing in place, since it spins freely and the stud is not even close to being completely in the hole. I do not have any power tools of any kind :(

What do!? :D

Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stripped E10 Torx Bolts trying to Remove Seats	IMAMEX	DIY / Maintenance / Service	5	11-08-2016 09:28 AM
Rear Drum to Disc Brake Conversion	Mark-UPI	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	40	03-13-2015 12:26 AM
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 08:03 AM
How to remove rear speaker panel on a Liftback?	W.A.S.P	In Car Entertainment + Electronics (audio / video / alarm)	7	11-25-2006 02:45 AM

09-29-2018, 09:53 PM	#3
naossoan Drives: 07 Yaris 3DR Join Date: Apr 2007 Location: MB, Canada Posts: 146	so i was able to get the drum off by beating it with a hammer. I got the stud out by beating it with a hammer as well. Now how in the hell do I get the new stud in? I got it fished in through the back and through the hole. I couldn't push it in the hole by hand with the teeth etc so I used a wrench as a washer behind the lug nut and tightened it down with my tire iron. I am now unable to tighten it anymore while trying to hold the thing in place, since it spins freely and the stud is not even close to being completely in the hole. I do not have any power tools of any kind :( What do!? :D Thanks