Evap system leak detected. Evap incorrect purge flow.

[Vyaris07]

My Yaris 2007 got issue with P0441 code, read this forum and figured out the EVAP canister rubber is degraded, then :
1. Remove gently the canister out.
2. Wrap each very-end with office 1/2" wide clear-tape about 3-4 turns.
3. Re-insert the canister pipe back gently.
4. Bought two spring clamp 3/8" size, put on at least 1/4" from each end.
5. Run engine and turn on the code reader, clear the P0441.
6. Check the gas cap for clean-up the O-ring seal, then tied it up with 1-2 clicks.

After running idle for 5 min, read the code again, as result, no more P0441!
DIY is easy as this task!