TRD Cluster - Toyota Yaris Forums

cm07yaris · 07-31-2007, 09:03 PM

Pics? I am very interested... and have paypal at my fingertips...

CKMotorsport · 08-01-2007, 12:10 PM

mine is made from fibre. the center gauge size is 80mm. and I use PIVOT RPM meter. and the other 2 gauges size 60mm, and i am using the BLITZ DC2 Meter (thin type). it is not heavy, but if you install the 3 meters, of course it will increase a little weight, but its still light and has no problem to install it. but remember you have to use thin type of meter, otherwise it won't fit or you have to drill your gloves compartment.

To install it, you need to put silicone around the meter holder so it will stick to the front gloves compartment. and for the meter wiring, you can hide behind the steering wheel, so you don't have to make a hole on the compartment

Its already painted in grey, to match with our local yaris (INDONESIA) dashboard color. but if you want us to carbon printed the meter, it will cost extra. it is a custom made by our shop, so it should fit to our car, without any problem. but i am not sure if the position is the same as USDM market. because your car is LH drive.

CKMotorsport · 08-01-2007, 12:22 PM

Quote:

Originally Posted by cm07yaris

Pics? I am very interested... and have paypal at my fingertips...

more picture

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TRD OR Eibach...i'm confused...	hoahmaru	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	39	11-07-2008 08:25 PM
TRD CAI & TRD Qiuck Shift	Polar	Items for Sale by private party	7	08-02-2007 06:03 PM
Fs: New Trd Stickers & Emblems !!!!! located in So cal	Trd86	Items for Sale by private party	13	06-25-2007 04:49 PM
TRD Parts	MC-BPT	Sponsors Classifieds Area	9	06-23-2007 10:51 AM
Toyota's Yaris TRD	VitzBoy	General Yaris / Vitz Discussion	10	07-24-2006 08:10 PM

07-31-2007, 09:03 PM	#1
cm07yaris View User's Garage Drives: 2007 Toyota Yaris Blazing Blue Join Date: May 2007 Location: Appleton, WI Posts: 647	Pics? I am very interested... and have paypal at my fingertips...

08-01-2007, 12:10 PM	#2
CKMotorsport Drives: Yaris Join Date: Jul 2007 Location: Jakarta, INDONESIA Posts: 32	mine is made from fibre. the center gauge size is 80mm. and I use PIVOT RPM meter. and the other 2 gauges size 60mm, and i am using the BLITZ DC2 Meter (thin type). it is not heavy, but if you install the 3 meters, of course it will increase a little weight, but its still light and has no problem to install it. but remember you have to use thin type of meter, otherwise it won't fit or you have to drill your gloves compartment. To install it, you need to put silicone around the meter holder so it will stick to the front gloves compartment. and for the meter wiring, you can hide behind the steering wheel, so you don't have to make a hole on the compartment Its already painted in grey, to match with our local yaris (INDONESIA) dashboard color. but if you want us to carbon printed the meter, it will cost extra. it is a custom made by our shop, so it should fit to our car, without any problem. but i am not sure if the position is the same as USDM market. because your car is LH drive.