Soon JDM SSR Wheels - Page 2 - Toyota Yaris Forums

yrsdrgn · 09-14-2007, 07:59 PM

Nice pictures!

JosephDoc · 09-15-2007, 03:11 PM

Ok.. you guys know why I am going with SSR? It is all Jeff's fault!

*kimona* · 09-16-2007, 12:28 AM

Well, the stagger just makes things look a little more even back to front. Many Japanese go with a set-up like ET42mm front and ET37mm rear, for example.

You said that you have ET39mm back and front, but that the rear wheels are designed to look deeper. So, the front and rear wheels are in fact different even though they have the same offset... is that correct? With this in mind, how can you rotate? (I'm not a fan of tire rotation anyway, but you mentioned it, and it doen't make sense to me with your design choice).

Now that you know how ET39mm fits the Yaris with 205/50 rubber, would you have chosen a slightly higher offset if you could do it over again?

Yeah, if the tires stick out way past the rear mudguards, it would look kind of stupid.

JosephDoc · 09-16-2007, 05:30 AM

Yeah, same off set but rear has deeper lip (1+" vs 1.5+" front/back) because it uses different thickness of center piece. The rotation still have to done through re-mounting the tires. It is good to have free labor service since I work in the shop.. heehee.

Hmm... more about off sets.. I would not make any adjustment on this up since all wheels flush out with fenders. Tires stick outside of the mud guard is pretty normal these days because autobody curves inward from fender to lower edge of the the body and especially our cars are extra rounded.

I can't find my book now but I remember in HyperRev108 recommends +37 on 16" wheels, and dont forget that offset accuracy varies depending on wheel manufacturers. For show cars, I love to see wheels have minimum gaps between calipers and the wheel spoks, and also allowing max lips. I think lowering to +33 on this wheel on the front is possible.

My opinion only

DuckinOut · 09-17-2007, 02:57 AM

those are SICK . damn you, you beat me to ordering them rims . haha, it's ok, i've got something rare coming in soon . hehe

yalease · 09-17-2007, 08:06 PM

need to save up and get some of these wheels.. they're niiice!

ItzyVitzy · 09-27-2007, 08:19 PM

Those are sick. I want to get the old school MK-II's.

09-14-2007, 07:59 PM	#1
yrsdrgn View User's Garage Drives: 2007 Yaris Join Date: Jan 2007 Location: SF,CA Posts: 1,874	Nice pictures! __________________

09-17-2007, 02:57 AM	#5
DuckinOut QUACK~!!!!! View User's Garage Drives: Yaris LB Join Date: Apr 2007 Location: SoCal Posts: 329	those are SICK . damn you, you beat me to ordering them rims . haha, it's ok, i've got something rare coming in soon . hehe __________________ " ... I don't follow, thus i reign *SUPREME* . The only time i follow is when i follow my dreams ... "

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forged rims Vs. alloys	red-jdm	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	14	07-23-2007 09:30 PM
SSR wheels on LB.	joey1320	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	06-30-2007 03:49 PM
Feedback on these wheels	BulletProofAuto	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	21	06-04-2007 09:09 PM
Buddy Club Wheels	BulletProofAuto	Sponsors Classifieds Area	8	10-19-2006 07:55 PM

09-15-2007, 03:11 PM	#2
JosephDoc View User's Garage Drives: 07 Yaris 3D Join Date: May 2007 Location: CA, USA Posts: 264	Ok.. you guys know why I am going with SSR? It is all Jeff's fault!

09-16-2007, 12:28 AM	#3
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,936	Well, the stagger just makes things look a little more even back to front. Many Japanese go with a set-up like ET42mm front and ET37mm rear, for example. You said that you have ET39mm back and front, but that the rear wheels are designed to look deeper. So, the front and rear wheels are in fact different even though they have the same offset... is that correct? With this in mind, how can you rotate? (I'm not a fan of tire rotation anyway, but you mentioned it, and it doen't make sense to me with your design choice). Now that you know how ET39mm fits the Yaris with 205/50 rubber, would you have chosen a slightly higher offset if you could do it over again? Yeah, if the tires stick out way past the rear mudguards, it would look kind of stupid.

09-16-2007, 05:30 AM	#4
JosephDoc View User's Garage Drives: 07 Yaris 3D Join Date: May 2007 Location: CA, USA Posts: 264	Yeah, same off set but rear has deeper lip (1+" vs 1.5+" front/back) because it uses different thickness of center piece. The rotation still have to done through re-mounting the tires. It is good to have free labor service since I work in the shop.. heehee. Hmm... more about off sets.. I would not make any adjustment on this up since all wheels flush out with fenders. Tires stick outside of the mud guard is pretty normal these days because autobody curves inward from fender to lower edge of the the body and especially our cars are extra rounded. I can't find my book now but I remember in HyperRev108 recommends +37 on 16" wheels, and dont forget that offset accuracy varies depending on wheel manufacturers. For show cars, I love to see wheels have minimum gaps between calipers and the wheel spoks, and also allowing max lips. I think lowering to +33 on this wheel on the front is possible. My opinion only

09-17-2007, 08:06 PM	#6
yalease Drives: 2008 Yaris HB Join Date: Sep 2007 Location: south bay. Posts: 14	need to save up and get some of these wheels.. they're niiice!

09-27-2007, 08:19 PM	#7
ItzyVitzy Drives: 08 Yaris Sedan Join Date: Sep 2007 Location: California Posts: 15	Those are sick. I want to get the old school MK-II's.