![]() |
![]()
![]() |
![]() |
#1 |
![]() ![]() ![]() ![]() ![]() Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008
Location: LI, New Yawk
Posts: 2,063
|
Rotated tires and adjusted rear brakes today PICS
I decided to rotate the tires today after 7,600miles on the clock. I have the factory Goodyear Eagles with a treadwear of 360. I went front to back when rotating. Used floor jacks, two at once.
Decided to adjust the rears while I was at it, they both seemed a bit loose and the handbrake lever was going up real high when pulled. Blew off all the dust with compressed air, which is NOT a good idea because the dust that comes off is nasty! ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() ![]() ![]() Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008
Location: LI, New Yawk
Posts: 2,063
|
More pics....
|
![]() |
![]() |
![]() |
#3 |
The Beautification of Car
|
i'm totaally new at this, can you point it out where you adjust it at? because my hand brake are up to my forehead now. thanks
|
![]() |
![]() |
![]() |
#4 | |
![]() ![]() ![]() ![]() ![]() Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008
Location: LI, New Yawk
Posts: 2,063
|
Quote:
If you've never played with brakes before, I don't recommend doing it yourself. |
|
![]() |
![]() |
![]() |
#5 |
![]() ![]() ![]() ![]() |
Part of the loose handbrake is the adjuster, but most of the initial slack in the E-brake is due to cable stretch. There's almost no wear on your shoes. I just changed mine out for the carbotech shoes, and did an adjustment (with 37,xxx miles on the car), and my pads showed pretty much no wear either.
|
![]() |
![]() |
![]() |
#6 |
![]() ![]() ![]() ![]() ![]() Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008
Location: LI, New Yawk
Posts: 2,063
|
Little wear to the rear shoes can also indicate that they are'nt doing much to stop the car. You'll eat up pads and rotors because the're doing all the work....
![]() |
![]() |
![]() |
![]() |
#7 |
![]() ![]() ![]() ![]() |
My front pads were pretty much new-looking as well.
|
![]() |
![]() |
![]() |
#8 |
![]() ![]() Drives: 07 Yaris Hatch 5speed Join Date: Nov 2006
Location: BC, Canada
Posts: 146
|
Wow, I had no idea that the rear brakes weren't self adjusting.
|
![]() |
![]() |
![]() |
#9 |
![]() ![]() ![]() ![]() ![]() Drives: 2005 Scion xB Join Date: Nov 2006
Location: The Black Hills of South Dakota
Posts: 1,059
|
|
![]() |
![]() |
![]() |
#10 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 08 Yaris Sedan Join Date: Oct 2008
Location: California - Bay Area
Posts: 2,773
|
Rear brakes are really not that self adjusting. My shop we have a oil change special for 29.95 where we rotate the tires with the oil change. And we always adjust the rear shoes of cars that are equipt with them. I would say uhmmmm 100% of all cars need adjusting Some way more than others. It makes a world of a difference in brake pedal feel as well as parking brake feel. They are self adjusting but to a point. Sometimes they need a little help.
__________________
|
![]() |
![]() |
![]() |
#11 |
DWEED
Drives: 3DR 2008 Metorite Metalic Join Date: Oct 2008
Location: Arizona
Posts: 1,161
|
What would be a better way to remove the dust?
__________________
Making a decision without following it with an action is still a fantasy. |
![]() |
![]() |
![]() |
#12 |
![]() ![]() ![]() ![]() ![]() Drives: 2013 Chevy Spark 1LT 5-speed Join Date: Oct 2008
Location: Oklahoma
Posts: 1,185
|
A brake system washer would be the best way.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|