NF210 and DF210 lowering springs? - Toyota Yaris Forums

bzinn 1 · 01-04-2009, 10:44 PM

Here is a picture of mine.

Honestly I get more rubbing withthe stock tires than the 17s,with the 17s they rub the wheel wells,with the stockies I rub frame of car on bumps but wheels are clear.

To install it is really easy to do.Took me and a buddie under 4 hours and most of that was spent talking and sipping beers.

Need Jack,jack stands,17mm offset box wrench,alen wrenches,torque wrench and a few other wrenches,seems 14mm was what it was.Easy install.hardest part was getting rear springs out....new springs go right in..

coheed · 01-05-2009, 01:17 AM

Quote:

Originally Posted by bzinn 1

Here is a picture of mine.

Sorry to thread jack but is that wind-up key real?

If it is where did you get it?

bzinn 1 · 01-05-2009, 03:13 AM

Quote:

Originally Posted by coheed

Sorry to thread jack but is that wind-up key real?

If it is where did you get it?

LOL I forgot that was on there.....a person on the xB forum on Scionlife was selling them a while back.It has a magnet base and then the winding part on top.They had those and the nose rings for front bumpers.

jaserhunter · 01-06-2009, 05:12 AM

It sound like i am going to stick with the NF's for safety.

coheed · 01-06-2009, 06:45 AM

I think with your tire size you would be fine with the DF's. And for saftey I would add a rear sway bar. Helps keep the car parrallel to the ground.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which lowering springs should I choose?	Danish Yaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	40	03-28-2009 06:56 PM
WTT: Tanabe DF210 4 NF210 or Similar	bdc87	Items for Sale by private party	0	11-06-2008 06:40 PM
DF210 or NF210	MrJester	Cosmetic Modifications (Exterior/Interior)	34	03-19-2007 10:06 PM
TANABE DF210 SPRINGS AVAILABLE!!!	C2AUTOSPL	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	20	08-05-2006 01:28 AM
IS DF210 is lower than Nf210 ??	mariosuper	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	1	07-08-2006 11:36 PM

01-04-2009, 10:44 PM	#1
bzinn 1 Drives: 2008 Yaris HB Join Date: Oct 2008 Location: University Place,WA Posts: 828	Here is a picture of mine. Honestly I get more rubbing withthe stock tires than the 17s,with the 17s they rub the wheel wells,with the stockies I rub frame of car on bumps but wheels are clear. To install it is really easy to do.Took me and a buddie under 4 hours and most of that was spent talking and sipping beers. Need Jack,jack stands,17mm offset box wrench,alen wrenches,torque wrench and a few other wrenches,seems 14mm was what it was.Easy install.hardest part was getting rear springs out....new springs go right in..

01-06-2009, 05:12 AM	#4
jaserhunter View User's Garage Drives: 2008 yaris LB Join Date: Oct 2008 Location: NC Posts: 166	It sound like i am going to stick with the NF's for safety.

01-06-2009, 06:45 AM	#5
coheed Drives: 08 BB LB Join Date: Dec 2008 Location: Maiden, NC Posts: 785	I think with your tire size you would be fine with the DF's. And for saftey I would add a rear sway bar. Helps keep the car parrallel to the ground.