df210s... - Toyota Yaris Forums

at3GG · 02-05-2009, 02:10 PM

Im installing my newly acquired df210's (thanks again Sabretooth!) ....my question is.....is it absolutely necessary to cut the bump stops?

Tamago · 02-05-2009, 02:55 PM

yes, cut off the portion "above" the plastic collar and use that part only. you can always save the part you cut off and re-install later if you go back to stock and so desire.

thebarber · 02-05-2009, 03:32 PM

bump steer ftL

cut those stops

Tamago · 02-05-2009, 03:59 PM

Quote:

Originally Posted by thebarber

bump steer ftL

cut those stops

bump steer is not caused by bump stops

http://en.wikipedia.org/wiki/Bump_Steer

thebarber · 02-05-2009, 04:30 PM

Quote:

Originally Posted by Tamago

bump steer is not caused by bump stops

http://en.wikipedia.org/wiki/Bump_Steer

ah, well there ya go, learn something new every day...

Nagoya_TRD. · 02-05-2009, 06:30 PM

Yes, you should cut the bumpstop. On any car, if you lower it.

Tamago · 02-05-2009, 06:52 PM

Quote:

Originally Posted by thebarber

ah, well there ya go, learn something new every day...

god bless wiki :)

Jerkratt · 02-05-2009, 06:58 PM

Quote:

Originally Posted by Nagoya_TRD.

Yes, you should cut the bumpstop. On any car, if you lower it.

not true.. TRD shocks and springs u dont cut the bump stops... says nothing of that in the install

at3GG · 02-05-2009, 07:39 PM

ah well did it anyway......took me 4 hours....too much blood a little sweat and a few tears of fury. I am not touching those things for a very very long time. Looks amazing.....but not touching them for a long time. Pictures when the anger of the install fades.....

Tamago · 02-05-2009, 07:46 PM

Quote:

Originally Posted by at3GG

ah well did it anyway......took me 4 hours....too much blood a little sweat and a few tears of fury. I am not touching those things for a very very long time. Looks amazing.....but not touching them for a long time. Pictures when the anger of the install fades.....

did you pull the wiper tray out?

mikenacarato · 02-05-2009, 09:12 PM

i had to to do mine. it sucked. :(

Tamago · 02-06-2009, 08:42 AM

Quote:

Originally Posted by mikenacarato

i had to to do mine. it sucked. :(

wiper tray comes out in like 10mins, what's the big deal?

33OH · 02-06-2009, 08:48 AM

I didn't think it was a bad install, and I'm hardly a mechanic.

at3GG · 02-07-2009, 05:21 PM

yup took the wiper piece off. Real problem was the nuts on top of the strut underneath the wiper piece. Took forever to get an angled wrench that would work. Just a lot of slips and knicks and cuts

ZING · 02-07-2009, 06:02 PM

i didnt cut my bumpstops, will it cause problems?

Jerkratt · 02-07-2009, 06:42 PM

^^what shocks and springs do u have

Tamago · 02-07-2009, 10:03 PM

Quote:

Originally Posted by at3GG

yup took the wiper piece off. Real problem was the nuts on top of the strut underneath the wiper piece. Took forever to get an angled wrench that would work. Just a lot of slips and knicks and cuts

if you have to do it again, the easy thing to do is pick up a set of "hollow sockets"

it's a 17mm socket. that way you can put the allen down thru the middle.

or you can use an impact gun to remove

that's the eeeeeasy way out

http://www.lowes.com/lowes/lkn?actio...399&lpage=none

something like that kit will ROCK your world.

ZING · 02-08-2009, 05:00 AM

Just NF210's.

Quote:

Originally Posted by Jerkratt

^^what shocks and springs do u have

02-05-2009, 02:10 PM	#1
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	df210s... Im installing my newly acquired df210's (thanks again Sabretooth!) ....my question is.....is it absolutely necessary to cut the bump stops? __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

02-05-2009, 02:55 PM	#2
Tamago View User's Garage Drives: UZJ100 Join Date: Dec 2006 Location: Off Grid Posts: 4,916	yes, cut off the portion "above" the plastic collar and use that part only. you can always save the part you cut off and re-install later if you go back to stock and so desire. __________________ Been a long time messing with cars..

02-05-2009, 03:32 PM	#3
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	bump steer ftL cut those stops __________________

02-05-2009, 07:39 PM	#9
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	ah well did it anyway......took me 4 hours....too much blood a little sweat and a few tears of fury. I am not touching those things for a very very long time. Looks amazing.....but not touching them for a long time. Pictures when the anger of the install fades..... __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

02-07-2009, 05:21 PM	#14
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	yup took the wiper piece off. Real problem was the nuts on top of the strut underneath the wiper piece. Took forever to get an angled wrench that would work. Just a lot of slips and knicks and cuts __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

02-05-2009, 06:30 PM	#6
Nagoya_TRD. Drives: None. Join Date: Feb 2009 Location: SoCal Posts: 131	Yes, you should cut the bumpstop. On any car, if you lower it.

02-05-2009, 09:12 PM	#11
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	i had to to do mine. it sucked. :(

02-06-2009, 08:48 AM	#13
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	I didn't think it was a bad install, and I'm hardly a mechanic.

02-07-2009, 06:02 PM	#15
ZING View User's Garage Drives: Yaris '09,GTi '09, BMW 3.30ci Join Date: Oct 2008 Location: Lebanon, Middle East. Posts: 582	i didnt cut my bumpstops, will it cause problems?

02-07-2009, 06:42 PM	#16
Jerkratt View User's Garage Drives: 08 Yaris Liftback S (RIP 07) Join Date: Apr 2007 Location: Fair Lawn, NJ Posts: 1,379	^^what shocks and springs do u have __________________ "It hurts more when its wet"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DF210's and toyota lowering strut/shocks FOR SALE	shinlee	Items for Sale by private party	9	01-25-2009 11:51 PM
Tanabe DF210's	bdc87	Items for Sale by private party	15	12-13-2008 07:08 PM
FS: Tanabe DF210's.	Herbicidal	Items for Sale by private party	13	12-03-2008 08:33 PM
Enkei RSV's with DF210's	Mattattack	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	5	01-18-2007 06:03 PM
DF210's on an S Sedan...	slvryaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	50	08-12-2006 09:31 PM