"Parmas" Motor - Page 11 - Toyota Yaris Forums

Parmas · 10-30-2009, 03:32 PM

Quote:

Originally Posted by cali yaris

make a little insulated "heat box"

What do you mean by a heat box?

You have to note that it is really tight in there!

cali yaris · 10-30-2009, 04:38 PM

I'll try and take a pic from mine

Parmas · 10-30-2009, 07:06 PM

Quote:

Originally Posted by cali yaris

I'll try and take a pic from mine

That would be appreciated!

By the way what oil do you use for your motor Garm?

I use Sunoco racing oil full synthetic 10/60

Parmas · 11-04-2009, 11:32 AM

Hard time to remove exhaust but finally coming to an end!

Turbo exhaust chamber, downpipe and exhaust manifold coated with DEI silicone high temp resistance paint. After paint dry wrapped turbo and downpipe with DEI titanium wrapping. Hopefully to get better engine bay temps.

Next......

- Finishing some wiring organization
- Red paint to engine cover and turbo/intercooler tubing
- Adding sandwich adapter for oil temp and pressure

cali yaris · 11-04-2009, 05:17 PM

Parmas, here is the insulation box I made for the fuel system. Just a thought. You could do the same thing for your brake cylinder in the engine bay -- or anything else. This is pretty stiff aluminum with insulation on one side:

Parmas · 11-05-2009, 12:49 PM

Thanks for the idea garm will check on it surely...

Parmas · 12-02-2009, 05:54 AM

Some enhanced new looks.... All paint is designed to work above 500DegreesF.

Next completition of new coolant piping which will be come blue...

Also done lots of shielding at the back panel area to protect brake lines from overheating.

cali yaris · 12-02-2009, 11:20 AM

Looks good man!!

advocate · 12-02-2009, 08:36 PM

God this thread rocks.

advocate · 12-03-2009, 01:40 AM

So if front mount creates huge turbo lag and top mount spools faster but hotter (and thus less boost), how the hell do you pick which one you want? Sounds like very big drawbacks on both parts.

I would think a larger engine, which creates more overall exhaust, wouldn't suffer as much from excess lag from a front mount versus a Yaris which burns much less overall fuel. Correct?

Blown_xa · 12-03-2009, 01:38 PM

Quote:

Originally Posted by advocate

So if front mount creates huge turbo lag and top mount spools faster but hotter (and thus less boost), how the hell do you pick which one you want? Sounds like very big drawbacks on both parts.

I would think a larger engine, which creates more overall exhaust, wouldn't suffer as much from excess lag from a front mount versus a Yaris which burns much less overall fuel. Correct?

read my above post. There is no noticable lag.

rob323 · 12-03-2009, 05:06 PM

Quote:

Originally Posted by advocate

So if front mount creates huge turbo lag and top mount spools faster but hotter (and thus less boost), how the hell do you pick which one you want? Sounds like very big drawbacks on both parts.

I would think a larger engine, which creates more overall exhaust, wouldn't suffer as much from excess lag from a front mount versus a Yaris which burns much less overall fuel. Correct?

You are over simplifying it a fair bit. Both setups can be made to work as good as each other and it depends on what purpose you want to design it for. There's alot of variables to be taken into account though to get it right (eg. piping diameter, bends, pressure drops, turbo sizing and efficiency ranges, gear ratios, cam design/ duration/ timing, engine timing, bov design etc etc).

And if all else fails, turn the antilag on

Parmas · 12-03-2009, 01:32 PM

Job finally finished although it came dark for a good photo... Will get some good photos with all completed...

Next -> lots of tuning and increasing gradually some boost :)

Still not dynod car so I don't want to throw numbers until finished

Blown_xa · 12-03-2009, 01:37 PM

sweetness

cali yaris · 12-05-2009, 01:14 AM

ha, true! just do it my way, that's the best. (just kidding!)

Parmas · 12-06-2009, 04:54 PM

Some recent pics...

Damn the camera got low battery when I was taking a video. Better luck next time....

mario98c · 12-06-2009, 06:19 PM

Post Videos!!!!!

yaris-me · 12-08-2009, 03:50 PM

It looks mean. Does it sound mean?

10-30-2009, 04:38 PM	#2
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,857	I'll try and take a pic from mine __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

11-04-2009, 05:17 PM	#5
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,857	Parmas, here is the insulation box I made for the fuel system. Just a thought. You could do the same thing for your brake cylinder in the engine bay -- or anything else. This is pretty stiff aluminum with insulation on one side: __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-02-2009, 11:20 AM	#8
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,857	Looks good man!! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-03-2009, 01:37 PM	#14
Blown_xa Drives: Scion xA Join Date: Oct 2009 Location: Virginia Posts: 449	sweetness __________________ Ptuning.com

12-05-2009, 01:14 AM	#15
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,857	ha, true! just do it my way, that's the best. (just kidding!) __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

11-05-2009, 12:49 PM	#6
Parmas Drives: Vitz RS Turbo Join Date: Nov 2008 Location: ML Posts: 577	Thanks for the idea garm will check on it surely...

12-02-2009, 08:36 PM	#9
advocate Drives: car Join Date: Oct 2008 Location: location Posts: 1,033	God this thread rocks.

12-03-2009, 01:40 AM	#10
advocate Drives: car Join Date: Oct 2008 Location: location Posts: 1,033	So if front mount creates huge turbo lag and top mount spools faster but hotter (and thus less boost), how the hell do you pick which one you want? Sounds like very big drawbacks on both parts. I would think a larger engine, which creates more overall exhaust, wouldn't suffer as much from excess lag from a front mount versus a Yaris which burns much less overall fuel. Correct?

12-06-2009, 06:19 PM	#17
mario98c Drives: Toyota Yaris Sedan 09 STD Join Date: May 2009 Location: Puerto Rico Posts: 1,227	Post Videos!!!!! __________________

12-08-2009, 03:50 PM	#18
yaris-me Learn to Relax Drives: 2007, Meteorite, LB Join Date: Dec 2008 Location: Anaheim, CA Posts: 2,070	It looks mean. Does it sound mean?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motor Longevity	Pavel Olavich	DIY / Maintenance / Service	10	03-17-2012 11:43 AM
cali yaris built motor	cali yaris	Performance Modifications	83	09-03-2009 11:08 PM
Fan motor noise...	500snakz	General Yaris / Vitz Discussion	10	12-01-2008 02:43 AM
Motor oil debate - interesting info but a long read.	mikeukrainetz	General Yaris / Vitz Discussion	6	12-10-2006 08:16 PM
Exchanging Motor on a Liftback 1.3 Lt	weckjuan	Performance Modifications	8	11-12-2006 10:58 AM