DIY : How to remove door panels - Toyota Yaris Forums

Altitude · 03-16-2009, 02:20 AM

Did you put any deadening material on the inside of the external door skin or just cover those holes on the inside as seen in the photo?

FEINT · 03-16-2009, 05:48 AM

Quote:

Originally Posted by Altitude

Did you put any deadening material on the inside of the external door skin or just cover those holes on the inside as seen in the photo?

External skin deadened, but didn't have time to take a photo. I am not finished with the deadening yet, waiting for my speakers to arrive. Then I have to get baffles and then I will deaden the door again and also over the baffles.

*Astroman* · 05-26-2009, 12:08 AM

Where is the DIY for the manual windows? Trying to figure out how to get the crank arm off.

privateyeblckbx · 05-27-2010, 04:36 AM

Should be a spring clip behind the crank handle. Push on ur panel slightly and look behind and should see a horse shoe shaped clip. You can either remove it with a special tool which is the easiest (Harbor freight or autozone for about $5-14) or a flat screw driver or a pick will work. Careful they shoot out sometimes and are easy to lose. Pretty sure the yaris is the clip type (i have power windows), if not it can be a cover type that u remove and swing out of place to reveal a torx screw or bolt.

05-26-2009, 12:08 AM	#3
Astroman Modded Moderator View User's Garage Drives: 07 Toyota Yaris, 71 Galaxie Join Date: Mar 2007 Location: Wenatchee, WA Posts: 3,670	Where is the DIY for the manual windows? Trying to figure out how to get the crank arm off. __________________ Please visit my online store for computer stuff and Official Yarisworld decals!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0	goku87	DIY / Maintenance / Service	127	02-19-2023 08:01 PM
DIY Variable Speed wiper stalk install	DanQ	DIY / Maintenance / Service	27	08-03-2017 08:22 PM
DIY Powered USB Ports	BailOut	DIY / Maintenance / Service	27	02-22-2017 11:17 AM
DIY (08' USDM LB): Interior Light Color Change	revnull	DIY / Maintenance / Service	37	05-21-2016 01:59 PM
DIY: Strut Tower Brace Bar	redyaris	DIY / Maintenance / Service	18	03-16-2014 07:52 PM

03-16-2009, 02:20 AM	#1
Altitude Drives: '08 LB MT Bayou Join Date: Oct 2008 Location: Colorado Posts: 1,671	Did you put any deadening material on the inside of the external door skin or just cover those holes on the inside as seen in the photo?

05-27-2010, 04:36 AM	#4
privateyeblckbx View User's Garage Drives: 2007 Yaris Liftback Join Date: Apr 2009 Location: Riverside,CA Posts: 13	Should be a spring clip behind the crank handle. Push on ur panel slightly and look behind and should see a horse shoe shaped clip. You can either remove it with a special tool which is the easiest (Harbor freight or autozone for about $5-14) or a flat screw driver or a pick will work. Careful they shoot out sometimes and are easy to lose. Pretty sure the yaris is the clip type (i have power windows), if not it can be a cover type that u remove and swing out of place to reveal a torx screw or bolt.