16x7 +38mm front, 16x8 +0 rear WILL IT FIT?

[Split]

^ that doesn't look lik eit would rub, but from what i've read, anything less than +42mm rubs. Hrm...

[cm07yaris]

Originally Posted by Split

^ that doesn't look lik eit would rub, but from what i've read, anything less than +42mm rubs. Hrm...

Can't always believe what you read...it's also lowered 1.75"

[Black Yaris]

Originally Posted by Split

^ that doesn't look lik eit would rub, but from what i've read, anything less than +42mm rubs. Hrm...

only true for the front.... and it depends upon the tire set-up as well


I could tuck those +0 offsets' no prob!

[UKblackyari]

im not sure about other setups but here is my experience. Im running +38 16x6.5 all round and i have 0 rubbing and im sitting on Tein Basics. Sorry for the pics but i dont have any from the side looking down the car.

[Thirty-Nine]

Originally Posted by UKblackyari

im not sure about other setups but here is my experience. Im running +38 16x6.5 all round and i have 0 rubbing and im sitting on Tein Basics. Sorry for the pics but i dont have any from the side looking down the car.

What size tires are you running?

[CASTREX]

Originally Posted by UKblackyari

im not sure about other setups but here is my experience. Im running +38 16x6.5 all round and i have 0 rubbing and im sitting on Tein Basics. Sorry for the pics but i dont have any from the side looking down the car.

If you are not rubbing the crap out of the inner plastic fenders with the basics....


Then you are not driving fast enough !!

[UKblackyari]

ill check the tire widths one i get home, but i know there 195/40 or 45. And i have never rubbed on this setup and believe me ive done some hard cornering in it and it still does not. The only time ive ever rubbed while havening the basics on was when i went to pick up the wheels with some friends in the back

[tonyg]

Originally Posted by UKblackyari

ill check the tire widths one i get home, but i know there 195/40 or 45. And i have never rubbed on this setup and believe me ive done some hard cornering in it and it still does not. The only time ive ever rubbed while havening the basics on was when i went to pick up the wheels with some friends in the back

so you're not rubbing because your running an improper tire size for the car? That would make your whole post irrelevant. You should be running 195/50/16 for a stock diameter.

You also say you have NEVER rubbed yet in the very next sentence you say you did rub. That’s contradictory.

So basically, yes you rub even though you run an undersized tire. If you ran a proper tire size you’d probably be rubbing all over the place.

[UKblackyari]

Originally Posted by tonyg

so you're not rubbing because your running an improper tire size for the car? That would make your whole post irrelevant. You should be running 195/50/16 for a stock diameter.

You also say you have NEVER rubbed yet in the very next sentence you say you did rub. That’s contradictory.

So basically, yes you rub even though you run an undersized tire. If you ran a proper tire size you’d probably be rubbing all over the place.

for starters, im posting up my experience so theres no need to be an ass, just trying to help here. And i said that i only rubbed when i went to PICK UP the wheels. I was still running stock then and ive said that i have never rubbed ON THIS CURRENT setup. I also check with my mechanic before getting the wheels, he said it would be fine and id trust his judgment over yours any day of the week. Also from your post it seems your running with the same setup as me? if so then why not post your own experiences?