GI: 1nz/1zz TB spacer - Toyota Yaris Forums

Nexus1155 · 04-25-2009, 04:14 AM

meth injection nozzles are around 1/8" thick and some nitrous are eiher 1/16th or 1/8th inch as well. We would be making both to user specifications as people will want to use different nozzles with the kit.

Each of these will be made to what the user wants. The only piece being produced in large quantity is the main throttle body spacer in its raw form.

LtNoogie · 04-26-2009, 05:10 AM

Quote:

Originally Posted by Nexus1155

meth injection nozzles are around 1/8" thick and some nitrous are eiher 1/16th or 1/8th inch as well. We would be making both to user specifications as people will want to use different nozzles with the kit.

Each of these will be made to what the user wants. The only piece being produced in large quantity is the main throttle body spacer in its raw form.

Thanks, I need to research the meth injection nozzles. I don't want to go back to the first page. Have you guys established a price yet?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1ZZ Throttle Body Spacer	tk-421	Performance Modifications	34	07-11-2017 10:48 PM
Spacer Template for Hatchback Aftermarket Speaker Install	bigsky2	In Car Entertainment + Electronics (audio / video / alarm)	19	03-12-2014 02:53 PM
Ideal Spacer Width For the Rear?	tk-421	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	01-27-2009 06:59 PM
DIY Spacer Templates for Speakers - Hatchback	bigsky2	DIY / Maintenance / Service	9	09-22-2007 07:16 PM
Toyota Throttle Body Spacer: the Best Fuel-Saving Device	davidmills	Performance Modifications	1	07-02-2007 12:38 AM

04-25-2009, 04:14 AM	#1
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	meth injection nozzles are around 1/8" thick and some nitrous are eiher 1/16th or 1/8th inch as well. We would be making both to user specifications as people will want to use different nozzles with the kit. Each of these will be made to what the user wants. The only piece being produced in large quantity is the main throttle body spacer in its raw form.