DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag - Page 9 - Toyota Yaris Forums

tforkner · 07-21-2009, 03:50 PM

Here's how I did my clutch switch. I used a SPDT submini roller lever switch, Radio Shack # 275-0017. I superglued it in place on the metal bracket.

TylerJ · 07-22-2009, 11:00 AM

Thanks for those of you who responded to my question. I am thinking about doing this mod this weekend. I will update on how it turns out.

bronsin · 07-22-2009, 11:40 AM

Does anyone know the Toyota Part Number for the dash panel next to the ignition switch? (the one I put the switches in for the CC) Im thinking it would be handy to have in case the car needs warranty work!

CTScott · 07-22-2009, 05:00 PM

Quote:

Originally Posted by bronsin

Does anyone know the Toyota Part Number for the dash panel next to the ignition switch? (the one I put the switches in for the CC) Im thinking it would be handy to have in case the car needs warranty work!

55446-52060-B0

bronsin · 07-22-2009, 07:48 PM

Thanks much appreciated!

bronsin · 07-23-2009, 02:19 PM

55446-52060-BO is $22 BTW.

TylerJ · 07-26-2009, 02:15 PM

So I had everything soft wired in last night and it worked perfectly. When I ran all the wires today and tried it after buttoning things up nothing happened. I think my jumper for the clutch cruise switch in the fuse box got moved when I snapped the lid back on. This is the coolest thing to have cruise for so cheap.

WDmac · 07-31-2009, 06:23 PM

Hello, I just bought a 2009 yaris sedan and wanted to put the $10 cruise on it. When I got into the bottom of the steering wheel colum, there is only 1 black wire coming out of the connector shown in CTSCOTT's diagram. Any ideas? Thanks.

CTScott · 07-31-2009, 06:42 PM

Quote:

Originally Posted by WDmac

Hello, I just bought a 2009 yaris sedan and wanted to put the $10 cruise on it. When I got into the bottom of the steering wheel colum, there is only 1 black wire coming out of the connector shown in CTSCOTT's diagram. Any ideas? Thanks.

I believe that someone else found that as well. That means that the 09 Sedans are like the 07-08 liftbacks, which means that you will need to run the wire yourself from the ECM to the switches. Take a look at this thread, working your way from the end back for more details:

http://www.yarisworld.com/forums/sho...=16188&page=29

WDmac · 07-31-2009, 07:03 PM

Thanks a lot I appreciate the time you took to post all this info. Looks like you have helped a bunch of people save some money. I'll check out that thread and let you know how it goes. Thanks again

trunkout · 06-13-2014, 01:27 PM

Quote:

Originally Posted by CTScott

I believe that someone else found that as well. That means that the 09 Sedans are like the 07-08 liftbacks, which means that you will need to run the wire yourself from the ECM to the switches.

I have an 09 sedan! The wires are there under my steering wheel!
I will post pics tomorrow on the install......

AlexNet0 · 07-31-2009, 06:46 PM

I havent seen anything yet I dont think, how do you remove the friggin dash, lol, I dont wanna break any clips, so can anyone post a pic with the screw and clip locations highlighted?

G6-R · 08-22-2009, 01:42 PM

I bought a brandnew Yaris 1800 T-Sport 3 doors ( delivery date in about 2 months from now )
I have a original cruisecontrole handel from a Corolla Verso 1800 can i use it for the Yaris Cruisecontrole ?

CTScott · 08-22-2009, 01:50 PM

Quote:

Originally Posted by G6-R

I bought a brandnew Yaris 1800 T-Sport 3 doors ( delivery date in about 2 months from now )
I have a original cruisecontrole handel from a Corolla Verso 1800 can i use it for the Yaris Cruisecontrole ?

No. For whatever reason, the European Yaris doesn't have cruise programmed into the ECM.

Antipilor · 10-22-2009, 01:21 PM

So I think I might have screwed up somewhere, I just notice in the last day or so after I installed this mod (stills not working but I havn't had time to track down the problem). I noticed that the airbag off light on the passenger side will light up only for a bit randomly while driving. The airbag on light works fine when someone is riding with me. Any ideas on what I did wrong?

CTScott · 10-22-2009, 01:32 PM

Quote:

Originally Posted by Antipilor

So I think I might have screwed up somewhere, I just notice in the last day or so after I installed this mod (stills not working but I havn't had time to track down the problem). I noticed that the airbag off light on the passenger side will light up only for a bit randomly while driving. The airbag on light works fine when someone is riding with me. Any ideas on what I did wrong?

The two are probably unrelated. The airbag light occasionally flickering may be due to the empty seat weight calibration being off.

For the cruise issue, start with your connection at the ECM. Make sure you are in the correct pin there. If you just want to verify that the cruise and airbag issues are unrelated, disconnect the cruise wire to the ECM.

Posting pictures of your connection to the ECM and you resistor setup/wiring to it will help as well.

julienrl · 08-29-2009, 07:56 PM

Hello, I wanted to do this but could not find the parts (even with the part numbers) for the covers\panels on the dash (so I can swap it for the normal one if I take the car in for servicing or something or want to sell the car as a trade in in the future), so I made the mirror cover one myself! It happens to be a hobby of mine to make plastic objects \ casting and molding, so if anyone needs a mirror cover, the master mold is made, and since that was the expensive part, i can make them for pretty cheap if anyone wants one for 10$ shipping anywhere included :). Takes about 24 to have one made and ready so it could be sent pretty quickly.

taka · 09-02-2009, 10:08 PM

Thank Scott for this DIY.
System is installed and working. Couple things I found on my 2008 Sedan: The wire is already installed between ECM pin 40 to connector AD4 under the dash. Instead of running a new wire from ECM or disassemble the dash to get to the wire from the top of AD4, I push a long pin up from the bottom of connector AD4 (pin 9) for wire connection to the switches.
My two spring loaded off toggle switches are mounted onto a existing blanking hole located beside the park brake handle. Toggle switches operation are: System enable/disable on each toggle and Set/Coast (when held). Sorry I would have posted photo of the installation if and when I find out how to.

07-31-2009, 06:23 PM	#8
WDmac Drives: Black Yaris sedan Join Date: Jul 2009 Location: IN Posts: 2	2009 yaris sedan cruise control Hello, I just bought a 2009 yaris sedan and wanted to put the $10 cruise on it. When I got into the bottom of the steering wheel colum, there is only 1 black wire coming out of the connector shown in CTSCOTT's diagram. Any ideas? Thanks.

07-31-2009, 07:03 PM	#10
WDmac Drives: Black Yaris sedan Join Date: Jul 2009 Location: IN Posts: 2	Thanks Thanks a lot I appreciate the time you took to post all this info. Looks like you have helped a bunch of people save some money. I'll check out that thread and let you know how it goes. Thanks again

07-31-2009, 06:46 PM	#12
AlexNet0 View User's Garage Drives: '07 Yaris 3dr Join Date: Nov 2008 Location: Rockland, ME Posts: 1,638	I havent seen anything yet I dont think, how do you remove the friggin dash, lol, I dont wanna break any clips, so can anyone post a pic with the screw and clip locations highlighted? __________________ ---------- MI-YW ----------

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM foglight switch and leather wrap steering wheel	808yarisLB	Cosmetic Modifications (Exterior/Interior)	8	03-11-2009 12:05 AM
SCION SPORT STEERING WHEEL, RED, XA AND XB, 03 TO 06	justoneyaris	Items for Sale by private party	3	12-04-2008 06:30 PM
steering wheel setup	aucorium	Cosmetic Modifications (Exterior/Interior)	0	07-24-2007 01:05 AM
How do you take off steering wheel	mrrock	Cosmetic Modifications (Exterior/Interior)	3	12-05-2006 10:16 AM

07-22-2009, 11:00 AM	#2
TylerJ Drives: Blazing Blue 2007 3dr HB 5MT Join Date: Jul 2009 Location: Ann Arbor, MI Posts: 14	Thanks for those of you who responded to my question. I am thinking about doing this mod this weekend. I will update on how it turns out.

07-22-2009, 11:40 AM	#3
bronsin Drives: 2009 Base Hatch 2 Dr Auto Join Date: Dec 2008 Location: nj Posts: 4,784	Does anyone know the Toyota Part Number for the dash panel next to the ignition switch? (the one I put the switches in for the CC) Im thinking it would be handy to have in case the car needs warranty work!

07-22-2009, 07:48 PM	#5
bronsin Drives: 2009 Base Hatch 2 Dr Auto Join Date: Dec 2008 Location: nj Posts: 4,784	Thanks much appreciated!

07-23-2009, 02:19 PM	#6
bronsin Drives: 2009 Base Hatch 2 Dr Auto Join Date: Dec 2008 Location: nj Posts: 4,784	55446-52060-BO is $22 BTW.

07-26-2009, 02:15 PM	#7
TylerJ Drives: Blazing Blue 2007 3dr HB 5MT Join Date: Jul 2009 Location: Ann Arbor, MI Posts: 14	So I had everything soft wired in last night and it worked perfectly. When I ran all the wires today and tried it after buttoning things up nothing happened. I think my jumper for the clutch cruise switch in the fuse box got moved when I snapped the lid back on. This is the coolest thing to have cruise for so cheap.

08-22-2009, 01:42 PM	#13
G6-R View User's Garage Drives: CHR 1.8 Hybrid + Yaris gen3 Join Date: Jul 2009 Location: Netherlands Posts: 81	I bought a brandnew Yaris 1800 T-Sport 3 doors ( delivery date in about 2 months from now ) I have a original cruisecontrole handel from a Corolla Verso 1800 can i use it for the Yaris Cruisecontrole ?

10-22-2009, 01:21 PM	#15
Antipilor Drives: 2008 Yaris 5-speed Join Date: Oct 2009 Location: Green Bay, WI Posts: 2	So I think I might have screwed up somewhere, I just notice in the last day or so after I installed this mod (stills not working but I havn't had time to track down the problem). I noticed that the airbag off light on the passenger side will light up only for a bit randomly while driving. The airbag on light works fine when someone is riding with me. Any ideas on what I did wrong?

08-29-2009, 07:56 PM	#17
julienrl Drives: 2007 yaris Join Date: Aug 2009 Location: ottawa Posts: 14	Hello, I wanted to do this but could not find the parts (even with the part numbers) for the covers\panels on the dash (so I can swap it for the normal one if I take the car in for servicing or something or want to sell the car as a trade in in the future), so I made the mirror cover one myself! It happens to be a hobby of mine to make plastic objects \ casting and molding, so if anyone needs a mirror cover, the master mold is made, and since that was the expensive part, i can make them for pretty cheap if anyone wants one for 10$ shipping anywhere included :). Takes about 24 to have one made and ready so it could be sent pretty quickly.

09-02-2009, 10:08 PM	#18
taka Drives: 2008 Sedan Join Date: Oct 2008 Location: Vaughan, Ontario Posts: 10	Thank Scott for this DIY. System is installed and working. Couple things I found on my 2008 Sedan: The wire is already installed between ECM pin 40 to connector AD4 under the dash. Instead of running a new wire from ECM or disassemble the dash to get to the wire from the top of AD4, I push a long pin up from the bottom of connector AD4 (pin 9) for wire connection to the switches. My two spring loaded off toggle switches are mounted onto a existing blanking hole located beside the park brake handle. Toggle switches operation are: System enable/disable on each toggle and Set/Coast (when held). Sorry I would have posted photo of the installation if and when I find out how to.