Fog light help please

[Liu997]

Originally Posted by CTScott

I have no idea from the pics what the second black wire is for. If you look at the switch itself, it has one black wire, which is the ground for the lighting circuit. If you follow the wires from the switch, Blue goes to D3-pin3, Green next to blue goes to D3-pin4, the other green goes to the accessory lighting wire, and black goes to ground.

Damn, I don't know. I'm just going to modify the switch first, then see what happens.

Wait also what is the point of cutting of the green wire closest to the black?

[CTScott]

Originally Posted by Liu997

Damn, I don't know. I'm just going to modify the switch first, then see what happens.

Wait also what is the point of cutting of the green wire closest to the black?

Also, check the wires and make sure that from the switch connector that they connect as I mentioned above. They need to be that way for the modded switch to work.