Group Buy - True Double Din Radio Trim for Liftbacks (180mm opening) - Page 10 - Toyota Yaris Forums

IsLNdbOi · 05-13-2009, 05:07 PM

Thanks Scott. Keep me on the list. I'll try taking pics. later. I just find it a PITA to remove the trim pieces and panels to take the HU out.

CTScott · 05-13-2009, 05:19 PM

Quote:

Originally Posted by IsLNdbOi

Thanks Scott. Keep me on the list. I'll try taking pics. later. I just find it a PITA to remove the trim pieces and panels to take the HU out.

Grab the vertical trim pieces low, on the outside (by the storage pockets) and pull outward. They come off much easier from bottom to top.

enviri · 05-13-2009, 06:03 PM

scott add me to the list too, its time for me to start getting a system.

WeeYari · 05-13-2009, 06:13 PM

It has arrived in Canada!

Will try to install tomorrow night. HU will be JVC.

IsLNdbOi · 05-14-2009, 04:25 AM

I tried trimming all around the back of the trim piece. Trimmed all the way to the line on the surface where you can see where the plastic was "joined" together.

Still no go. This is the best pic. I could take of it.

It's like this on both sides:

I do plan on getting the new version of the P8000BT later this year. They've released new versions of most of their 2008 models already. Hopefully, they don't add the stupid faceplate on the new model.

I do still want another of these DD trim pieces Scott so keep me on the list.

CTScott · 05-14-2009, 10:42 AM

Quote:

Originally Posted by IsLNdbOi

I tried trimming all around the back of the trim piece. Trimmed all the way to the line on the surface where you can see where the plastic was "joined" together.

Still no go. This is the best pic. I could take of it.

It's like this on both sides:

I do plan on getting the new version of the P8000BT later this year. They've released new versions of most of their 2008 models already. Hopefully, they don't add the stupid faceplate on the new model.

I do still want another of these DD trim pieces Scott so keep me on the list.

If I understand correctly, you're trimming the lip of the trim piece to make it less deep? If that is the case, how close is it depth-wise from the trim piece being able to snap on? Also, if you were able to move the HU in deeper (by re-drilling the bracket mounting holes), would that help?

Danish Yaris · 05-14-2009, 11:23 AM

Quote:

Originally Posted by pariahdecss

Yes my HU is a Kenwood DNX7120 and I had to trim the new trim piece (not the headunit) about 10mm on the back lip to make it fit - for those that are really picky the color of the new piece for my '09 LB is not a 100% match against the center AC/Air center gauge cluster trim but I am fine with that. The new trim piece is lighter than the slightly darker/smokier USDM center gauge panel.

. . . but it still looks hella better than the Metra® gap filler crap kit

Hi

That´s because the radiopanel is made for the non faceliftet model which is a lighter silver in color.

Regards Steven.

IsLNdbOi · 05-14-2009, 04:53 PM

Quote:

Originally Posted by CTScott

If I understand correctly, you're trimming the lip of the trim piece to make it less deep?

Yes, I thought that's what everyone was telling me to try in the previous posts in this thread. It doesn't look very nice though. You can see in the picture that the trimmed lip can be seen.

Quote:

Originally Posted by CTScott

If that is the case, how close is it depth-wise from the trim piece being able to snap on? Also, if you were able to move the HU in deeper (by re-drilling the bracket mounting holes), would that help?

Not sure how close it is to being able to snap on. Didn't take that measurement. I don't think moving the HU in deeper would help. The problem is the attached ring / faceplate on the front of the HU.

WeeYari · 05-14-2009, 06:48 PM

SHIT!!

It's not going to work without some jigging. Going to have to shave about a quarter of an inch off of the sides of the HU opening in the trim panel.

CTScott · 05-14-2009, 07:47 PM

Quote:

Originally Posted by WeeYari

SHIT!!

It's not going to work without some jigging. Going to have to shave about a quarter of an inch off of the sides of the HU opening in the trim panel.

What HU do you have?

WeeYari · 05-14-2009, 07:52 PM

Quote:

Originally Posted by CTScott

What HU do you have?

JVC

CTScott · 05-14-2009, 08:06 PM

Quote:

Originally Posted by WeeYari

JVC

Looking at an unmounted picture of your KW-XG700, it has a similar lip to IsLNdbOi's Pioneer. Does the narrower part beyond that lip fit through the opening, or is that the area that needs to be trimmed for?

IsLNdbOi · 05-15-2009, 12:31 AM

The manual for the P8000BT shows this for the dimensions:

Dimensions (W × H × D):
D
Chassis ..................... 178 mm × 100 mm × 160 mm
(7 in.× 3-7/8 in.× 6-1/4 in.)
Nose ........................... 170 mm × 94 mm × 8 mm
(6-3/4 in.× 3-3/4 in.× 3/8 in.)

I couldn't get the P8000BT in even through the front of the new trim piece.

WeeYari · 05-15-2009, 06:17 PM

Ground off the positioning pins on the HU mounting brackets. Was then able to position HU further back.

IsLNdbOi · 05-17-2009, 07:02 AM

So after grinding the pins off and mounting the HU further back, does any part of the HU even touch the new 180mm DD trim piece?

WeeYari · 05-17-2009, 07:41 AM

Quote:

Originally Posted by IsLNdbOi

So after grinding the pins off and mounting the HU further back, does any part of the HU even touch the new 180mm DD trim piece?

The face frame of the HU measured 178mm, with an extended nose at 170mm.
By repositioning the HU, the trim now 'rests' on the 178mm portion of the face frame. There is no contract being made on the inside of the trim piece opening.

CTScott · 05-17-2009, 03:51 PM

I still haven't gotten a reply from PMs to: ozmdd, yrsdrgn, hwnstyle21, or Syroyizhka.

Please let me know ASAP if you are still interested. I would like the get the last of these shipped this week. If I don't hear from you by mid-week, I'm going to go ahead and move them to the next people on the waiting list.

IsLNdbOi · 05-17-2009, 03:58 PM

How many people do you have on the waiting list? Are there enough on the list for the next group buy?

05-13-2009, 06:13 PM	#166
WeeYari View User's Garage Drives: 06 5dr LE (deceased), 13 Soul Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,828	It has arrived in Canada! Will try to install tomorrow night. HU will be JVC. __________________

05-14-2009, 04:25 AM	#167
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	I tried trimming all around the back of the trim piece. Trimmed all the way to the line on the surface where you can see where the plastic was "joined" together. Still no go. This is the best pic. I could take of it. It's like this on both sides: I do plan on getting the new version of the P8000BT later this year. They've released new versions of most of their 2008 models already. Hopefully, they don't add the stupid faceplate on the new model. I do still want another of these DD trim pieces Scott so keep me on the list. Last edited by IsLNdbOi; 05-14-2009 at 04:54 AM.

05-14-2009, 06:48 PM	#171
WeeYari View User's Garage Drives: 06 5dr LE (deceased), 13 Soul Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,828	SHIT!! It's not going to work without some jigging. Going to have to shave about a quarter of an inch off of the sides of the HU opening in the trim panel. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dash destroyed in electrical fire.	purpleminx	General Yaris / Vitz Discussion	79	06-12-2009 03:53 PM
[Recovered] Group Buy for Australia #1 (Badges)	harveyjai	Australia	9	12-13-2008 03:59 PM

05-13-2009, 05:07 PM	#163
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	Thanks Scott. Keep me on the list. I'll try taking pics. later. I just find it a PITA to remove the trim pieces and panels to take the HU out.

05-13-2009, 06:03 PM	#165
enviri View User's Garage Drives: 2010 Yaris Join Date: Oct 2008 Location: CT Posts: 1,520	scott add me to the list too, its time for me to start getting a system.

05-15-2009, 12:31 AM	#175
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	The manual for the P8000BT shows this for the dimensions: Dimensions (W × H × D): D Chassis ..................... 178 mm × 100 mm × 160 mm (7 in.× 3-7/8 in.× 6-1/4 in.) Nose ........................... 170 mm × 94 mm × 8 mm (6-3/4 in.× 3-3/4 in.× 3/8 in.) I couldn't get the P8000BT in even through the front of the new trim piece.

05-17-2009, 07:02 AM	#177
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	So after grinding the pins off and mounting the HU further back, does any part of the HU even touch the new 180mm DD trim piece?

05-17-2009, 03:51 PM	#179
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,450	I still haven't gotten a reply from PMs to: ozmdd, yrsdrgn, hwnstyle21, or Syroyizhka. Please let me know ASAP if you are still interested. I would like the get the last of these shipped this week. If I don't hear from you by mid-week, I'm going to go ahead and move them to the next people on the waiting list.

05-17-2009, 03:58 PM	#180
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	How many people do you have on the waiting list? Are there enough on the list for the next group buy?