DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag - Toyota Yaris Forums

daftcain · 06-07-2009, 10:33 AM

I'm probably going to do this mod soon and I'm about to gather what parts I need. I'll probably go with the mounted two button method, and since I have an 07 3-door HB auto, I'll need to run a wire through the firewall. This seems like it will be the same installation as Patrick Johnson (http://www.yarisworld.com/forums/sho...&postcount=101). I'll get the resistors/switches from digikey, where should I get the wiring and what gauges? Also how hard is it to feed a wire through the rubber hose and have it come out the other side?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM foglight switch and leather wrap steering wheel	808yarisLB	Cosmetic Modifications (Exterior/Interior)	8	03-11-2009 12:05 AM
SCION SPORT STEERING WHEEL, RED, XA AND XB, 03 TO 06	justoneyaris	Items for Sale by private party	3	12-04-2008 06:30 PM
steering wheel setup	aucorium	Cosmetic Modifications (Exterior/Interior)	0	07-24-2007 01:05 AM
How do you take off steering wheel	mrrock	Cosmetic Modifications (Exterior/Interior)	3	12-05-2006 10:16 AM

06-07-2009, 10:33 AM	#11
daftcain I've made a post! Drives: 07 3dr HB Join Date: Apr 2009 Location: washington, dc Posts: 1	I'm probably going to do this mod soon and I'm about to gather what parts I need. I'll probably go with the mounted two button method, and since I have an 07 3-door HB auto, I'll need to run a wire through the firewall. This seems like it will be the same installation as Patrick Johnson (http://www.yarisworld.com/forums/sho...&postcount=101). I'll get the resistors/switches from digikey, where should I get the wiring and what gauges? Also how hard is it to feed a wire through the rubber hose and have it come out the other side?