Can Someone Identify This?

[CTScott]

Did you try flipping the switch and then trying to remote start? Maybe the installer didn't want to bother with the hood switch, so they just put a toggle inside for disabling remote start for service.

Pop the panel below the steering column (it flips down). That's the most common place to put an alarm, remote start, or keyless entry module.

[PhilD424]

Originally Posted by CTScott

Did you try flipping the switch and then trying to remote start? Maybe the installer didn't want to bother with the hood switch, so they just put a toggle inside for disabling remote start for service.

Pop the panel below the steering column (it flips down). That's the most common place to put an alarm, remote start, or keyless entry module.

Thats what i did to take the pics nothing was there. However there is some kind of red light in the back towards the firewall thats in the pic. That might be it.

[CTScott]

Originally Posted by PhilD424

Thats what i did to take the pics nothing was there. However there is some kind of red light in the back towards the firewall thats in the pic. That might be it.

I see the red light back there. Can you get the camera back there to get a picture of the module?

Is there a sticker on the back of the remote with an FCC ID?

[PhilD424]

Originally Posted by CTScott

I see the red light back there. Can you get the camera back there to get a picture of the module?

Is there a sticker on the back of the remote with an FCC ID?

I messed with the switch and all it does is enable the remote start when in the up position and in the down position it disables it.