Nitto midpipe? - Toyota Yaris Forums

areithan1980 · 07-07-2009, 07:29 PM

How does this work exactly? do i still need a full axle back exhaust for this or just straight pipe and a fancy tip?

blacksandiegovitz · 07-07-2009, 07:31 PM

Bolts up to the end of the header then goes all the way back to where an "axle-back" system would start , so yes you still need a "axle-back" of choice .

areithan1980 · 07-07-2009, 07:42 PM

ty so much for a quick respond thinking of getting this and then pair it with medallion

cali yaris · 07-07-2009, 07:50 PM

that's a good combo, I had that on my car for a while.

Aothachos · 07-07-2009, 09:03 PM

wish it would fit the sedan though

Split · 07-07-2009, 09:31 PM

except for the fact that you're running cat-less and it can smell bad.. i have to say that the nitto mid-pipe is the only thing that really improves the exhaust note on this car. its hard to make a 4cyl 1.5L sound deep without sounding tinny/raspy/ricey.. this is the only thing that does it, and only because it doesn't actually increase the volume at all. it just makes it deeper.

areithan1980 · 07-07-2009, 10:58 PM

Quote:

Originally Posted by cali yaris

that's a good combo, I had that on my car for a while.

Watch out garm this might be my first purchase ever from microimage

coz i don't think i would want this used for my car and at least i want my mid pipe to be new. I can't wait but i know it will happen prolly int he next 3 weeks or so.

areithan1980 · 07-07-2009, 10:58 PM

Quote:

Originally Posted by Split

except for the fact that you're running cat-less and it can smell bad.. i have to say that the nitto mid-pipe is the only thing that really improves the exhaust note on this car. its hard to make a 4cyl 1.5L sound deep without sounding tinny/raspy/ricey.. this is the only thing that does it, and only because it doesn't actually increase the volume at all. it just makes it deeper.

/agree

areithan1980 · 07-07-2009, 11:05 PM

my project list for the next 2 months lol!:

1.) Lowering Springs > (which will be done hopefully by next week and staypuft will make it happen)
2.) Air Intake> still havn't decided yet if im gonna go CAI or just a short ram.
3.) Nitto MId pipe
4.) Axle Back Exhaust
5.) Better Shocks> (hopefully by this time my stock shocks aren't screwd up yet because of lowering.

Open for suggestions :) and I wouldn't mind used stuff on any of these except for my mid pipe. I'm getting my mid pipe from garm fo sho!

Aothachos · 07-07-2009, 11:28 PM

Quote:

Originally Posted by areithan1980

my project list for the next 2 months lol!:

1.) Lowering Springs > (which will be done hopefully by next week and staypuft will make it happen)
2.) Air Intake> still havn't decided yet if im gonna go CAI or just a short ram.
3.) Nitto MId pipe
4.) Axle Back Exhaust
5.) Better Shocks> (hopefully by this time my stock shocks aren't screwd up yet because of lowering.

Open for suggestions :) and I wouldn't mind used stuff on any of these except for my mid pipe. I'm getting my mid pipe from garm fo sho!

I like the drop on the tein s-tech springs that i have on my sedan, i would suggest them. Air intake if you going for a CAI I would stick to the TRD, I had it on my car for 1 year already and no problems and good addition to the car.

vten · 07-07-2009, 11:47 PM

I have the nitto midpipe + nitto axle back and wr header + AEM CAI ....sounds super during WOT , but mild on city driving ....I think it's a perfect combo for meh ...

areithan1980 · 07-08-2009, 12:11 AM

Quote:

Originally Posted by vten

I have the nitto midpipe + nitto axle back and wr header + AEM CAI ....sounds super during WOT , but mild on city driving ....I think it's a perfect combo for meh ...

oooohh!!! i would love to see some videos of this setup and how it sounds!!!!

areithan1980 · 07-08-2009, 12:15 AM

Quote:

Originally Posted by Aothachos

I like the drop on the tein s-tech springs that i have on my sedan, i would suggest them. Air intake if you going for a CAI I would stick to the TRD, I had it on my car for 1 year already and no problems and good addition to the car.

yeha i heard s-techs are not bad but i think im gonna try DF 210's since someone is selling to me for 100 shipped just arranging some payment methods with him. as far as intake i dont think ima go CAI annymore something liek the afe's or blitz short ram will be ideal for me for now. Unless i get a good price on a set of used TRD CAI tehn i might jsut give it a try.

vten · 07-08-2009, 01:00 AM

I'll try to get a sound clip soon then

I had the AFE intake , which I love hows it looks, but I had a problem with the maf housing , then I change it to AEM CAI and am really happy with the result.

the aem doesn't look as good as the AFE, but it sounds a lot better during wot

....I believe, the TRD CAI is a rebrand AEM ... I may be wrong tho

kngrsll · 07-08-2009, 10:23 AM

so there is no cat in the midpipe? does that mean if you do a full exhaust: header, midpipe, and rear section, that you have no cats?

mrbond · 07-08-2009, 11:50 AM

^ yup, no cats whatsoever. Not my ideal setup at all - I'd have piping custom made with the stock cat in place.

areithan1980, for the air intake, I'd highly recommend the Fujita F5. I had the AFE short ram and the Blitz short ram intakes before, and the Fujita just works soo much better for me. Btw, where on the north side do you live? Starting at the beginning of September, I'm going to be up by Loyola, so you should hit me up sometime.

areithan1980 · 07-08-2009, 05:46 PM

Quote:

Originally Posted by mrbond

^ yup, no cats whatsoever. Not my ideal setup at all - I'd have piping custom made with the stock cat in place.

areithan1980, for the air intake, I'd highly recommend the Fujita F5. I had the AFE short ram and the Blitz short ram intakes before, and the Fujita just works soo much better for me. Btw, where on the north side do you live? Starting at the beginning of September, I'm going to be up by Loyola, so you should hit me up sometime.

FO sho man! i'll try to keep that in mind around september right? got it. i'd look in fujita's i never heard of em. I live by waukegan close to naval base. And i didn't know there's no cat on that nitto mid pipe yayks! Maybe ima hold up on midpipe for now :( until i find more info's. Oh, and one thing too are fujitas oiled or dry?

areithan1980 · 07-08-2009, 05:51 PM

Quote:

Originally Posted by vten

I'll try to get a sound clip soon then

I had the AFE intake , which I love hows it looks, but I had a problem with the maf housing , then I change it to AEM CAI and am really happy with the result.

the aem doesn't look as good as the AFE, but it sounds a lot better during wot

....I believe, the TRD CAI is a rebrand AEM ... I may be wrong tho

what was the problem in the housing?

07-07-2009, 07:29 PM	#1
areithan1980 Drives: 2007 Yaris Hatchback Join Date: Jun 2009 Location: North Chicago IL 60064 Posts: 66	Nitto midpipe? How does this work exactly? do i still need a full axle back exhaust for this or just straight pipe and a fancy tip?

07-07-2009, 07:50 PM	#4
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	that's a good combo, I had that on my car for a while. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

07-08-2009, 10:23 AM	#15
kngrsll Apexing Egg!! Drives: 07 Toyota Yaris white hatch Join Date: Oct 2006 Location: Spartanburg, SC Posts: 872	so there is no cat in the midpipe? does that mean if you do a full exhaust: header, midpipe, and rear section, that you have no cats? __________________ HighTach Motorsports 2007 Toyota Yaris-ARGH!! Mods: Tokico HTS, 6.6 kg F, 6.1 kg R custom springs, 23 mm RSB, 2-way TRD LSD, 15x7 +25 Team Dynamic wheels, 195/55/15 Dunlop Star Specs, Cobra Suzuka S

07-08-2009, 11:50 AM	#16
mrbond View User's Garage Drives: 2008 meteorite hatchback Join Date: Nov 2008 Location: Illinois Posts: 960	^ yup, no cats whatsoever. Not my ideal setup at all - I'd have piping custom made with the stock cat in place. areithan1980, for the air intake, I'd highly recommend the Fujita F5. I had the AFE short ram and the Blitz short ram intakes before, and the Fujita just works soo much better for me. Btw, where on the north side do you live? Starting at the beginning of September, I'm going to be up by Loyola, so you should hit me up sometime. __________________ - HOOOEY! That's one tahny little cawr! What the heck kinda toy is that? - A Toyota Yaris - A whut Yaris?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-07-2009, 07:31 PM	#2
blacksandiegovitz Your mom goes to college View User's Garage Drives: 08 Vitz Join Date: Oct 2008 Location: Just chillin' out brah ! Posts: 1,434	Bolts up to the end of the header then goes all the way back to where an "axle-back" system would start , so yes you still need a "axle-back" of choice .

07-07-2009, 07:42 PM	#3
areithan1980 Drives: 2007 Yaris Hatchback Join Date: Jun 2009 Location: North Chicago IL 60064 Posts: 66	ty so much for a quick respond thinking of getting this and then pair it with medallion

07-07-2009, 09:03 PM	#5
Aothachos Banned Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Long Island, NY Posts: 326	wish it would fit the sedan though

07-07-2009, 09:31 PM	#6
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	except for the fact that you're running cat-less and it can smell bad.. i have to say that the nitto mid-pipe is the only thing that really improves the exhaust note on this car. its hard to make a 4cyl 1.5L sound deep without sounding tinny/raspy/ricey.. this is the only thing that does it, and only because it doesn't actually increase the volume at all. it just makes it deeper.

07-07-2009, 11:05 PM	#9
areithan1980 Drives: 2007 Yaris Hatchback Join Date: Jun 2009 Location: North Chicago IL 60064 Posts: 66	my project list for the next 2 months lol!: 1.) Lowering Springs > (which will be done hopefully by next week and staypuft will make it happen) 2.) Air Intake> still havn't decided yet if im gonna go CAI or just a short ram. 3.) Nitto MId pipe 4.) Axle Back Exhaust 5.) Better Shocks> (hopefully by this time my stock shocks aren't screwd up yet because of lowering. Open for suggestions :) and I wouldn't mind used stuff on any of these except for my mid pipe. I'm getting my mid pipe from garm fo sho!

07-08-2009, 01:00 AM	#14
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	I'll try to get a sound clip soon then I had the AFE intake , which I love hows it looks, but I had a problem with the maf housing , then I change it to AEM CAI and am really happy with the result. the aem doesn't look as good as the AFE, but it sounds a lot better during wot ....I believe, the TRD CAI is a rebrand AEM ... I may be wrong tho

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Header that fits the nitto midpipe	regal	Performance Modifications	4	05-15-2009 10:36 AM
Nitto Midpipe w/ no muffler	SweetRS	Performance Modifications	12	05-12-2009 01:57 AM
Q about nitto midpipe?	jaserhunter	Performance Modifications	28	04-22-2009 03:28 PM
dc header and nitto midpipe..	mastaofdisasta	Performance Modifications	3	04-17-2009 10:12 AM
FS: Sedan Nitto Mid-Pipe w/ CEL Fix	Split	Items for Sale by private party	37	12-18-2008 01:11 PM