HELP! SRS light won't go off, horn doesn't work

[MGargano]

Originally Posted by mikenacarato

the airbag light will come on when you disconnect the airbag and will stay on until the dealer turns it off.

Following these directions should clear the codes out of the SRS ECU and turn off the SRS light:

Here is the procedure for manually clearing the stored codes (The SM says that some codes do not clear with a power down):

1. With a jumper, connect the TC and CG terminals on the OBD port.

2. When the SRS light starts flashing the codes, within 3 to 10 seconds remove the jumper frm TC. After 3 seconds the SRS light will come on solid.

3. Within 2 to 4 seconds after the SRS lights, reconnect the jumper to TC.

4. Within 2 to 4 seconds the SRS light will go off. Once it does, within 2 to 4 seconds disconnect TC.

5. Within 2 to 4 seconds the SRS light will come one solid again. Within 2 to 4 seconds after the SRS lights, reconnect the jumper to TC.

6. Within 2 to 4 seconds the SRS light will go off. One second later, if all DTCs are cleared the SRS light will flash steadily on and off. If codes are still registered it will flash in the pattern to indicate the stored codes.