Turbo Project Yaris TS 1.8L

[Zefoxe]

Btw do you think you can ask ur shop to keep a blue print of ur manifold setup? That way some of us can purchase it ready to go?

[CASTREX]

Originally Posted by Zefoxe

Btw do you think you can ask ur shop to keep a blue print of ur manifold setup? That way some of us can purchase it ready to go?

Shop? Blue prints??? no prints here!!! All manual.. old fashion cutting and welding.

But really no need for any prints!

You can get a Stage2 JGS manifold for a 1zz
http://jgsturbo.com/index2.html

The downpipe will still have to be a custom job from a serious exhaust shop... when you are doing the downpipe just take the stage 2 manifold and have them weld the radius plate and the turbo flange on the position that you want.

This is how my manifold will look: (probably not as clean and nice but you get the idea) this is turbo toyotas design for the 1nz-fe

[CASTREX]

PROJECT UPDATE:

Good and BAD news today.


Good news first: Received my cheap CXracing intercooler today along with an universal set of alum bends...
Looks great for the price!


Bad news:
Major set back for the project. At least 4 weeks delay.

Longstory short: One of the tranny shifter cables broke...
Looks like one of the rubber protective boots near the tranny linkeage pulled back a little. This caused a misaligment of the cable and put it in contact with some metal part.
The worst part is that the dealer doesn't have the cable in stock and that means 22-30 days from Japan.