Help with supercharger install.

[AznGouki]

The fuse part is not in my instructions. Which fuse is to be replaced?
http://www.blitzperformancesales.com...f/sc_yaris.pdf
These are the instructions I used. It's not obsolete is it?

[kurokoma-kun]

Originally Posted by AznGouki

The fuse part is not in my instructions. Which fuse is to be replaced?
http://www.blitzperformancesales.com...f/sc_yaris.pdf
These are the instructions I used. It's not obsolete is it?

That is the version I edited, should be the most up to date.

See page 21 (last page), step 38 for instructions on the fuse.

Bummer about the belt and crank issue. Hope it's resolved quickly and cheaply.

[KCALB SIRAY]

Originally Posted by LtNoogie

Look down at all your pulleys with a flashlight and make sure they are all in a straight line and that none of them are angled from the other. Also, make sure none of the pulleys are offset left or right too much from the others.

I had issues with my spacer as well. ended up using three washers instead of the supplied spacer.

AznGouki -- Any problems with the directions to make the gasket I told you about?