Flooded Yaris

[CTScott]

Originally Posted by gswell

Scott,
Thanks for the feedback, I was hoping for some input from you. I bought a product that is for rust and rust prevention that I have from a previous unfinished project (KBS-coatings.com) It's a 3 step process and I haven't used it so I comment on it (i think it's had some write ups in classic car mags tho). If I do it, I'll look to remove the stuck on pads on the floor pan which I guess are used for sound proofing. Then I can perform the full process and paint directly to the metal (and all the other metal pieces between the two front seats). For now I'll just drive the car until I make a decision on doing this rust seal application. It's probably best to do this application/paint and then put some new sound proofing material down.

I have some time to kill before the carpet insulation pieces arrive...

It's amazing how much water those insulation pads can absorb. When I pulled the ones out of Crashy they weighed about 20lbs each.

The rust preventative, or at least a light coat of WD40 is probably not a bad idea on the bare metal parts. Since you have windows, I would suggest putting a household dehumidifier in the car an running it overnight (with the drain plugs back in). That will suck the moisture out of the harnesses, head liner, and all off the things that are a hassle to disassemble.

[CtrlAltDefeat]

Originally Posted by CTScott

It's amazing how much water those insulation pads can absorb. When I pulled the ones out of Crashy they weighed about 20lbs each.

The rust preventative, or at least a light coat of WD40 is probably not a bad idea on the bare metal parts. Since you have windows, I would suggest putting a household dehumidifier in the car an running it overnight (with the drain plugs back in). That will suck the moisture out of the harnesses, head liner, and all off the things that are a hassle to disassemble.

they also have these big tubs of Damp-Rid which would not need to be plugged in (also if cheaper if you you don't have a house dehydrator already) I think you can get them at hardware stores...