|
10-18-2009, 12:15 PM | #109 | |
daily driver
|
Quote:
only mods were intake and res-back exhaust...everything else is stock
__________________
|
|
10-27-2009, 06:56 PM | #110 |
Drives: Yaris 2008 3 dr 5 spd Join Date: Aug 2009
Location: WI
Posts: 16
|
What kind of exhaust?
Hey barber,
What kind of res back exhaust? You got 5 or 6 hp out of it. Is it really, really loud? Thanks, Talc |
10-27-2009, 10:13 PM | #111 | |
daily driver
|
Quote:
not too loud, but louder than the stock midpipe
__________________
|
|
12-01-2009, 12:32 AM | #112 |
Finally got my dyno sheet. Here are the two highest numbers from the two different days.
The 140whp/135tq number is without the custom overdrive pulley. The 136 whp/140 tq number IS with the pulley. Decrease in overall whp, but a gain in torque. As you can see, with the pulley on, it pulls stronger all across the board. Meth/water injection and a tune are in the near future. |
|
12-08-2009, 09:36 PM | #113 |
just want to share some dyno results, please excuse me for the unclear scan. |
|
12-08-2009, 10:28 PM | #114 | |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Quote:
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
|
06-05-2010, 02:59 PM | #115 |
Drives: Toyota Yaris Sedan 09 STD Join Date: May 2009
Location: Puerto Rico
Posts: 1,227
|
102whp Mods are Cai, NST 10% underdrive pulley and Trd Exhaust. Coming Soon DC header, Camcon and e- cutout
__________________
|
06-05-2010, 04:47 PM | #116 | |
Drives: Yaris Sedan Join Date: Sep 2006
Location: MayaWest, Puerto Rico
Posts: 1,574
|
Quote:
Congrats! Y lo q falta todavia! vamo' alante! BTW dame info del dyno pa ir
__________________
I Drive a 129whp Yaris ;) |
|
07-26-2010, 06:30 PM | #117 |
CERTIFIED ASE/SUBARU TECH
|
Anyone seen the sedan 1nz-fe automatic dyno?
|
07-31-2010, 02:27 PM | #118 |
Dyno chart of a Vios on a turbo kit, and later on with an upgraded ball bearing turbo.
Engine is stock, and automatic transmission is stock as well. The missing gap in the dyno chart was caused by the Okada Project coils interfering with the Dynojet's RPM reading. More information can be found here.
__________________
454 whp, 1.7 bar boost, pump gas, water/meth. 501 whp, 2.2 bar boost, pump gas + avgas, no water/meth. www.viosturbo.com - World's first 500 WHP 1NZ-FE |
|
07-31-2010, 03:01 PM | #119 |
vroom vroom
Drives: lil red 5-door Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
|
200hp? niiiiice!
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ... |
07-31-2010, 04:52 PM | #120 |
Drives: 09 3dr (sold), 12 SE 5spd : ) Join Date: May 2009
Location: SA TX
Posts: 140
|
WOW, 29% increase in HP, and 24% incrase in TQ..........
So the only chang between the first and second graph is the new turbo? Why the different redline? Also, was it done on the same dyno? Thanks
__________________
Its all about the MPG's !! |
08-05-2010, 01:02 PM | #121 |
Yup it was done on the same dyno, pretty amazing considering the engine is still stock and its running on an automatic transmission.
__________________
454 whp, 1.7 bar boost, pump gas, water/meth. 501 whp, 2.2 bar boost, pump gas + avgas, no water/meth. www.viosturbo.com - World's first 500 WHP 1NZ-FE |
|
08-07-2010, 03:32 AM | #122 |
JDM yO!
Drives: '09 3dr. 5-spd Join Date: Oct 2008
Location: Sydney, Australia
Posts: 331
|
AFE CAI and 2" resonator-back mandrel bent exhaust with tri-flow muffler, otherwise stock Yaris.
__________________
. |
08-08-2010, 10:43 PM | #123 |
daily driver
|
69.3kw = 93whp....not bad....1.3L?
__________________
|
08-09-2010, 04:41 AM | #124 |
JDM yO!
Drives: '09 3dr. 5-spd Join Date: Oct 2008
Location: Sydney, Australia
Posts: 331
|
Actually, 1.5.. so it's pretty bad compared to what some of you are getting (>100whp?).. HAHAH =\
I'm guessing it's my tri-flow ruining my exhaust flow? What do you say Barber?
__________________
. |
08-17-2010, 08:32 PM | #125 |
Drives: Yaris Sedan Join Date: Sep 2006
Location: MayaWest, Puerto Rico
Posts: 1,574
|
2 Puertorrican Yaris
Went to the dyno with Mario98c
Mine (YarisPR) 107whp 98tq -Intake(custom/home made) -Header(ebay) -Catless no resonator 2" exhaust with non-performance muffler -NST 10% Underdrive Crank Pulley -1zz TB Mario98c 103whp 108tq -Intake CAI (ebay) -NST 10% Underdrive Crank Pulley -Catless no resonator 2" exhaust with TRD muffler Video Link http://www.youtube.com/watch?v=c6AleRw2TYs
__________________
I Drive a 129whp Yaris ;) Last edited by YarisPR; 08-18-2010 at 01:07 AM. |
09-11-2010, 04:45 PM | #126 |
Free Mustache Rides
|
wow, i was really considering the blitz, but to get up to 130...man. i guess in our little car that's good, but i was hoping closer to 180 after s/c and header and pulleys, etc.
__________________
Club SHIFT |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
News : 2007 Toyota Yaris - the little Euro's official arrival | VitzBoy | General Yaris / Vitz Discussion | 9 | 06-06-2017 12:51 AM |
WR Yaris Intake Picture & Dyno. | WRLEO | Performance Modifications | 37 | 04-05-2007 07:02 PM |
WR INTAKE SYSTEM : YOU GET $100 FOR DYNO RESULTS ! | WRLEO | Sponsors Classifieds Area | 0 | 02-22-2007 10:14 AM |