boutton Engine Start - Toyota Yaris Forums

yarismo · 10-26-2009, 10:28 AM

hi, I am trying to install an "Engine Start" button on my Yaris HB, but I don't know how to remove the steering wheel cover, and the wiring method..please help

thnx ! شكرا

CTScott · 10-26-2009, 05:23 PM

Did you buy the complete OEM kit, or one of the ebay kits?

schleppy · 10-27-2009, 11:13 AM

Where can one buy the complete OEM kit?

CTScott · 10-27-2009, 11:26 AM

Quote:

Originally Posted by schleppy

Where can one buy the complete OEM kit?

I don't think you can actually buy it as a kit, but you could purchase all of the OEM parts needed.

schleppy · 10-27-2009, 01:05 PM

Quote:

Originally Posted by CTScott

I don't think you can actually buy it as a kit, but you could purchase all of the OEM parts needed.

Part numbers? :D

CTScott · 10-27-2009, 01:42 PM

Quote:

Originally Posted by schleppy

Part numbers? :D

Too many to dig through the EPC to list. The list includes the push button switch, solenoid for the steering lock, ECU and receiver for the smart card, etc.

All of which would have to be imported from another market.

Sparks Toyota-TRD · 10-27-2009, 03:17 PM

Send me your email and I can get you the information you are looking for!

Tim

1NZYaris1 · 10-27-2009, 04:16 PM

How about this

Chrome gear knob, enhanced with engine starter button. Once installed you simply turn your key to on position and press the starter button on the gear knob to fire up your engine.

Universal fit, supplied with all wiring and relay box required for installation on a 12 volt negative earth vehicle. Also includes a range of adaptors to suit most gear shift shafts.

CTScott · 10-27-2009, 10:10 PM

Quote:

Originally Posted by Sparks Toyota-TRD

Send me your email and I can get you the information you are looking for!

Tim

Tim,

Can you order parts for other markets?

Sparks Toyota-TRD · 10-28-2009, 12:35 PM

I unfortunately cannot get parts from other markets, but I can give you guys the How-To's on removing the interior. :D

Tim

battleversiontc · 10-28-2009, 03:27 PM

push button starts are normally a split in between the starter wire so if you can llok for a wire refrence guide to find starter wires thats how i wired my s2000 push button start

yarismo · 10-28-2009, 04:08 PM

can anyone post some pictures on how to do the wiring for that button?

CTScott · 10-28-2009, 04:23 PM

Quote:

Originally Posted by yarismo

can anyone post some pictures on how to do the wiring for that button?

We need some more information to help you.

Did you buy just the button, or is it a kit that also includes one or more relays?

Did you receive any documentation with the button?

yarismo · 10-28-2009, 04:37 PM

actually, I have only the button, no documentation.
I wanna make a general idea about what I will find under the cover and the wiring before I open it!

CTScott · 10-28-2009, 04:46 PM

Quote:

Originally Posted by yarismo

actually, I have only the button, no documentation.
I wanna make a general idea about what I will find under the cover and the wiring before I open it!

OK. If it is just the button and you don't want to open the package yet, can you tell how many wires come out of the switch?

If the switch is just a momentary switch, then you could just hook it up between the gray wire in pin 5 and the black wire in pin 7 of the keyswitch connector. The only problem would be if you accidentally hit the switch once it was running, you would grind the starter.

THE ONE · 10-28-2009, 04:48 PM

OK, I don't know if this helps, but anyway... I found this cool site where they have a lot of DIY's, and one of those tells you how to install the ingnition button step by step, with pics and everithing.

http://www.instructables.com/id/Push...-for-your-Car/

Hope it is of some use...

*NOTE: You still have to use your keys to start your car.

yarismo · 10-28-2009, 05:13 PM

the link you gave doesn't work for me !!!

* the "cover" that I mean is not the package, I mean the plastic parts that covers the steering wheel

CTScott · 10-28-2009, 05:16 PM

Quote:

Originally Posted by yarismo

the link you gave doesn't work for me !!!

* the "cover" that I mean is not the package, I mean the plastic parts that covers the steering wheel

That link is really not directly applicable. Can you snap a picture of the back of the switch with the wires and of any documentation that came with it?

10-26-2009, 10:28 AM	#1
yarismo View User's Garage Drives: Yaris HB luna Join Date: Sep 2009 Location: algeria Posts: 51	boutton Engine Start hi, I am trying to install an "Engine Start" button on my Yaris HB, but I don't know how to remove the steering wheel cover, and the wiring method..please help thnx ! شكرا Last edited by yarismo; 10-26-2009 at 10:54 AM.

10-28-2009, 03:27 PM	#11
battleversiontc View User's Garage Drives: 08 vip yaris Join Date: Oct 2008 Location: 808 Posts: 501	push button starts are normally a split in between the starter wire so if you can llok for a wire refrence guide to find starter wires thats how i wired my s2000 push button start __________________ 08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified

10-28-2009, 04:48 PM	#16
THE ONE ドンフアン Drives: Yaris coming really soon... :) Join Date: Oct 2009 Location: GT Posts: 102	OK, I don't know if this helps, but anyway... I found this cool site where they have a lot of DIY's, and one of those tells you how to install the ingnition button step by step, with pics and everithing. http://www.instructables.com/id/Push...-for-your-Car/ Hope it is of some use... *NOTE: You still have to use your keys to start your car. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
yaris won't start, engine truns over but won't start.	zara616	General Yaris / Vitz Discussion	16	09-05-2021 12:39 PM
The Nitrous Thread	ChinoCharles	Performance Modifications	116	02-16-2016 04:07 PM
A Mystery Oi'll Say!	Yar Is Word	Fuel Economy Forum	16	05-11-2013 05:22 AM
Remote Engine Start PT398-33070	Reeves360	In Car Entertainment + Electronics (audio / video / alarm)	3	08-26-2009 08:11 PM
Rough engine start w/76?	guyver408	DIY / Maintenance / Service	12	06-26-2009 01:18 AM

10-26-2009, 05:23 PM	#2
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	Did you buy the complete OEM kit, or one of the ebay kits?

10-27-2009, 11:13 AM	#3
schleppy I love momentum. View User's Garage Drives: 2009 Yaris LB, Red Join Date: Feb 2009 Location: Boston, MA Posts: 587	Where can one buy the complete OEM kit?

10-27-2009, 03:17 PM	#7
Sparks Toyota-TRD Drives: Toyota/Scion Join Date: Jun 2006 Location: Myrtle Beach, SC Posts: 156	Send me your email and I can get you the information you are looking for! Tim

10-28-2009, 12:35 PM	#10
Sparks Toyota-TRD Drives: Toyota/Scion Join Date: Jun 2006 Location: Myrtle Beach, SC Posts: 156	I unfortunately cannot get parts from other markets, but I can give you guys the How-To's on removing the interior. :D Tim

10-28-2009, 04:08 PM	#12
yarismo View User's Garage Drives: Yaris HB luna Join Date: Sep 2009 Location: algeria Posts: 51	can anyone post some pictures on how to do the wiring for that button?

10-28-2009, 04:37 PM	#14
yarismo View User's Garage Drives: Yaris HB luna Join Date: Sep 2009 Location: algeria Posts: 51	actually, I have only the button, no documentation. I wanna make a general idea about what I will find under the cover and the wiring before I open it!

10-28-2009, 05:13 PM	#17
yarismo View User's Garage Drives: Yaris HB luna Join Date: Sep 2009 Location: algeria Posts: 51	the link you gave doesn't work for me !!! * the "cover" that I mean is not the package, I mean the plastic parts that covers the steering wheel