DIY Cruise Control FAQ (2006-2010 Yaris) - Page 8 - Toyota Yaris Forums

CTScott · 02-22-2011, 10:55 AM

Quote:

Originally Posted by mbera

Hi guys I just got my yaris - 2011 - 1.3 in south africa. - can I do this mod on her. ?
Thanx

No. Only the US and Canada 1.5L models have cruise control functionality built into the ECM.

Yaross · 02-24-2011, 05:13 AM

sirs, just a stupid question...

if we really wanted CC in our yaris, but our ECM was not equipped:

1. can we swapped our ECM with those that have CC already programmed in it? --or --
2. can we use our existing ecm but with some modifications?

our yaris is drive-by-wire, so there must be some other way to do it...

CTScott · 02-24-2011, 06:35 AM

Quote:

Originally Posted by Yaross

sirs, just a stupid question...

if we really wanted CC in our yaris, but our ECM was not equipped:

1. can we swapped our ECM with those that have CC already programmed in it? --or --
2. can we use our existing ecm but with some modifications?

our yaris is drive-by-wire, so there must be some other way to do it...

Only the ECM for the 1.5L engine has the built in cruise control, so if your Yaris has the 1.5, then you could swap in a USDM ECM.

The other option is to use one of the aftermarket cruise control systems. There is one system from Europe for Toyotas and I believe that the Rostra system will work with non-US Yaris.

kimjo · 02-27-2011, 02:30 PM

Well we just finished installing the cruise control. It took a total of 2 1/2 hours including the test drive. It probably would have taken less but we triple checked everything. Can't be too careful.

eBay stalk $30 with shipping
Wires from Scott with the correct ends $10 (but really priceless also)
Saving $360 and doing it ourselves. Priceless

Thanks to everyone here on YW for sharing all you learn.

DSprague · 03-01-2011, 08:00 AM

Ok, picked up my new 2010 Yaris sedan yesterday with no power package. What Toyota part #s do I need to install factory CC with the stalk on the column? I read through these 9 pages and now my head hurts and I feel confused! Any help would be great.
Thanks
Dan

CTScott · 03-01-2011, 08:19 AM

Quote:

Originally Posted by DSprague

Ok, picked up my new 2010 Yaris sedan yesterday with no power package. What Toyota part #s do I need to install factory CC with the stalk on the column? I read through these 9 pages and now my head hurts and I feel confused! Any help would be great.
Thanks
Dan

Dan,

For your 2010 you should just need the Stalk (84632-34011), stalk wire (84633-02020), and mounting screws(90159-50199 {quantity 2}). If you want the precut hole for the stalk, rather than drilling the plastic cover, you will also need the lower boss (45184-52130-B0).

ibanezjeepguy · 03-01-2011, 08:34 AM

http://www.trdsparks.com/displaypart...&parts_id=2306
pretty cheap stalk & wire combo. for the screws just get some from hardware store I believe they're M5 x 0.8 , same as xbox 360 heatsink

CTScott · 03-01-2011, 09:07 AM

Quote:

Originally Posted by ibanezjeepguy

http://www.trdsparks.com/displaypart...&parts_id=2306
pretty cheap stalk & wire combo. for the screws just get some from hardware store I believe they're M5 x 0.8 , same as xbox 360 heatsink

Also, I have a couple of the stalks with the wire and the screws for $40 shipped, which is less than half of that price.

DSprague · 03-01-2011, 01:17 PM

Quote:

Originally Posted by CTScott

Also, I have a couple of the stalks with the wire and the screws for $40 shipped, which is less than half of that price.

I'm in, how do I pay you?
Dan

CTScott · 03-01-2011, 02:05 PM

Quote:

Originally Posted by DSprague

I'm in, how do I pay you?
Dan

PM sent.

Midnightsun · 04-21-2011, 01:49 PM

Quote:

Originally Posted by CTScott

Also, I have a couple of the stalks with the wire and the screws for $40 shipped, which is less than half of that price.

Hey CTScott, I have been trying to get a hold of you as I would like to purchase this from you. Can you PM me please. Thanks.

CTScott · 04-23-2011, 11:45 AM

Quote:

Originally Posted by Midnightsun

Hey CTScott, I have been trying to get a hold of you as I would like to purchase this from you. Can you PM me please. Thanks.

Sorry, I've been out of the country SCUBA diving for a week. I just hit you back by PM.

ibanezjeepguy · 03-01-2011, 09:09 AM

how long have you had those? I could've used an awesome deal like that last year!

CTScott · 03-01-2011, 10:11 AM

Quote:

Originally Posted by ibanezjeepguy

how long have you had those? I could've used an awesome deal like that last year!

About two months ago a friend of mine got me a few at dealer cost.

CB900F2 · 03-19-2011, 05:28 AM

Thanks Scott!

CB900F2 · 03-21-2011, 08:55 PM

Installed the CC on my CND version 2008 Sedan and all went well, I want to give big thanks to every one and especially Scott for all of his great help!

I installed the OEM CC stalk and ran the CC signal line from D3 to AD4, getting to AD4 was not too bad, just trying to work in the small area under the dash was the only challenge. Grounded the GND line from D3 was no issue.

I recommend the up grade to anyone needing CC

Thanks again to Scott for all his great help and supply of connectors.

Aetre · 03-28-2011, 08:57 PM

Hi, all. Newbie with a 2009 3dr liftback automatic and the dumb question of the day:

What parts of this cruise control installation, if any, would void the warranty?

ibanezjeepguy · 03-28-2011, 09:41 PM

none...

03-21-2011, 08:55 PM	#16
CB900F2 Drives: 08 Sedan Join Date: Oct 2008 Location: Toronto Posts: 301	Installed the CC on my CND version 2008 Sedan and all went well, I want to give big thanks to every one and especially Scott for all of his great help! I installed the OEM CC stalk and ran the CC signal line from D3 to AD4, getting to AD4 was not too bad, just trying to work in the small area under the dash was the only challenge. Grounded the GND line from D3 was no issue. I recommend the up grade to anyone needing CC Thanks again to Scott for all his great help and supply of connectors. Last edited by CB900F2; 03-23-2011 at 07:06 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 11:59 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
Using Cruise control	Driver	General Yaris / Vitz Discussion	14	11-09-2006 10:12 PM

02-24-2011, 05:13 AM	#2
Yaross Drives: 2006 Yaris HB 5DR Join Date: Oct 2008 Location: Jubail, KSA Posts: 105	sirs, just a stupid question... if we really wanted CC in our yaris, but our ECM was not equipped: 1. can we swapped our ECM with those that have CC already programmed in it? --or -- 2. can we use our existing ecm but with some modifications? our yaris is drive-by-wire, so there must be some other way to do it...

02-27-2011, 02:30 PM	#4
kimjo Drives: 2007 HB Yaris Join Date: Dec 2010 Location: Oshkosh WI Posts: 6	Well we just finished installing the cruise control. It took a total of 2 1/2 hours including the test drive. It probably would have taken less but we triple checked everything. Can't be too careful. eBay stalk $30 with shipping Wires from Scott with the correct ends $10 (but really priceless also) Saving $360 and doing it ourselves. Priceless Thanks to everyone here on YW for sharing all you learn.

03-01-2011, 08:00 AM	#5
DSprague Drives: 2010 Yaris sedan black Join Date: Feb 2011 Location: Littleton, Co Posts: 2	Ok, picked up my new 2010 Yaris sedan yesterday with no power package. What Toyota part #s do I need to install factory CC with the stalk on the column? I read through these 9 pages and now my head hurts and I feel confused! Any help would be great. Thanks Dan

03-01-2011, 08:34 AM	#7
ibanezjeepguy Drives: 2010 Meteorite Liftback Join Date: Nov 2010 Location: Myrtle Beach, SC USA Posts: 53	http://www.trdsparks.com/displaypart...&parts_id=2306 pretty cheap stalk & wire combo. for the screws just get some from hardware store I believe they're M5 x 0.8 , same as xbox 360 heatsink

03-01-2011, 09:09 AM	#13
ibanezjeepguy Drives: 2010 Meteorite Liftback Join Date: Nov 2010 Location: Myrtle Beach, SC USA Posts: 53	how long have you had those? I could've used an awesome deal like that last year!

03-19-2011, 05:28 AM	#15
CB900F2 Drives: 08 Sedan Join Date: Oct 2008 Location: Toronto Posts: 301	Thanks Scott!

03-28-2011, 08:57 PM	#17
Aetre Drives: 2009 3dr Liftback Join Date: Mar 2011 Location: Northern Virginia Posts: 13	Hi, all. Newbie with a 2009 3dr liftback automatic and the dumb question of the day: What parts of this cruise control installation, if any, would void the warranty?

03-28-2011, 09:41 PM	#18
ibanezjeepguy Drives: 2010 Meteorite Liftback Join Date: Nov 2010 Location: Myrtle Beach, SC USA Posts: 53	none...