Remote Start DIY Wiring Guide 2006-2010 Yaris

[jroy]

Hi Scott, this starter has a couple of connections I couldn't match up using your install guide.

FACTORY ALARM DISARM
FACTORY REARM
(+) IGNITION OUT (TO ALARM)
(-) ACTIVATION INPUT

And where is the neutral safety switch connection? Or is that not needed because the motor wont start unless its in park or neutral? Thanks!

-Josh

[CTScott]

Originally Posted by jroy

Hi Scott, this starter has a couple of connections I couldn't match up using your install guide.

FACTORY ALARM DISARM
FACTORY REARM
(+) IGNITION OUT (TO ALARM)
(-) ACTIVATION INPUT

And where is the neutral safety switch connection? Or is that not needed because the motor wont start unless its in park or neutral? Thanks!

-Josh

Does your car have an alarm? If not those are not used, if it does and the alarm is the factory TVIP one, I can point you to those connections. If it is an aftermarket one, then you will have to refer to the documentation for the alarm.

A neutral safety switch would be used if you are installing a remote starter on a Yaris with a manual transmission. The Yaris doesn't have one, so as per my guide, you would need to purchase or create one that will work with the Yaris's shift.