Well I did know you could use the g-tech without configuring the rpm sensor. Ihave only plugged the g-tech in the 12V output.
Quote:
Originally Posted by CTScott
Which "method" are you using to feed it the RPM signal? The Yaris actually has a very good RPM signal, if you use the TACH wire on the OBDII connector. If you are using the method where the GTech looks for ignition noise on the power wire, that would explain it having trouble, as modern cars have good ignition noise isolation.
|
Is there a way to connect the g-tech to that signal wire ?
03-03-2010, 03:10 PM
Similar Threads
Threaded Mode