BackSeat REVIVAL

[swidd]

I'd like an explanation of how it was done. Does the seat cushions snap off on the 60/40, like it does on the full bench?

I looked under there, and don't see any plastic clips etc, and the bolts are kinda out of way for a good torque wrench to get to it.

[Gideon]

Originally Posted by swidd

I'd like an explanation of how it was done. Does the seat cushions snap off on the 60/40, like it does on the full bench?

I looked under there, and don't see any plastic clips etc, and the bolts are kinda out of way for a good torque wrench to get to it.

If you have the 60/40 you need to first remove the plastic covers near the floor, and remove those bolts on both the 60 portion as well as the 40.

Once that is done you can pull the seats up, still attached to the rest of the seat via the hinge to access the bolts underneath. The rear ones are easy, just slide the seats on the track forward using the appropriate levers on each seat side and that will allow you access to those bolts.