Yaris Sedan Deadening and Sound system upgrade

[Herbicidal]

You're welcome. I posted a reply in that other thread. My suggestion at this moment would be to squirt in some PB Blaster and let it work on the rust until the weekend.

[derickveliz2]

Originally Posted by Herbicidal

You're welcome. I posted a reply in that other thread. My suggestion at this moment would be to squirt in some PB Blaster and let it work on the rust until the weekend.

Thanks, I'll stop by a hardware store and pick up some PB Blaster tonight!

Also I got this:



from Loren, and these are the instruction he gave me:

"Just jack up the car and squeeze on in on each rear spring. Will raise the ride height a little, and by removing an active coil from the spring, also raise the spring rate."

My rear springs are not holding well the extra weight, and adding woofers, box and Amps! you can tell on the pictures that the rear is lower than the front, and been so soft (NF210s) tires tuck inside wheel well very easy and rubs, so this may help a little bit! We'll see how it goes.

Thanks!






I'm sorry to make a right turn out of the topic here, but we'll continue on our project...

I'm almost done with the floor, but pilot's area, and let me tell you that the noise makes it's way! so I need to make sure to get all leaks as possible, so for some one who only want's to do a portion of the treatment, I would suggest to do the DOORS, then WHEEL WELLS, at least with the doors treated you will improve the sound of your speakers, block outside noise but the most wonderful feeling is when you close your doors! THUMP, THUMP, very nice every time you slam your doors.

D.