DIY - Bypassing Tire Pressure Warning System (TPWS / TPMS) - Toyota Yaris Forums

birdman · 08-01-2010, 11:54 PM

I'm finally ready to do this fix. The switch option requires that the snipped brown wire that is attached to the connector be grounded, while the upper part is wired to the switch. Right?

CTScott · 08-02-2010, 12:22 AM

Quote:

Originally Posted by birdman

I'm finally ready to do this fix. The switch option requires that the snipped brown wire that is attached to the connector be grounded, while the upper part is wired to the switch. Right?

No, there is not a ground connection. With the switch, you are either leaving the brown wire connected or connecting it to the +5V line.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tire pressure sensors	Tink1	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	11	10-21-2008 06:53 PM
Intake Systems Decision Maker..	Blenjar	Performance Modifications	25	09-15-2007 11:07 PM
The Tire inflation debate...	Tankota	General Yaris / Vitz Discussion	20	06-01-2006 08:09 PM

08-01-2010, 11:54 PM	#1
birdman Drives: '08 Blazing Blue Yaris LB Join Date: Sep 2009 Location: USA Posts: 496	I'm finally ready to do this fix. The switch option requires that the snipped brown wire that is attached to the connector be grounded, while the upper part is wired to the switch. Right?