DIY Keyless Entry?

[Eatoman]

I happen to have a remote car starter collecting dust in my garage which I never installed on my old car since I was planning to get rid of it. So you're saying that if the car starter remote has the "Lock/Unlock" buttons, it's possible to get keyless entry?
How easy or difficult is it to install a remote car starter?

[CTScott]

Originally Posted by Eatoman

I happen to have a remote car starter collecting dust in my garage which I never installed on my old car since I was planning to get rid of it. So you're saying that if the car starter remote has the "Lock/Unlock" buttons, it's possible to get keyless entry?
How easy or difficult is it to install a remote car starter?

Correct, if the remote starter is type that includes keyless entry, you can use it. I put together a guide for the wiring for hooking up a remote starter with keyless entry:

http://www.yarisworld.com/forums/sho...ght=diy+remote

[Eatoman]

Thanks for the info CTScott. One last question: My car has a kill switch installed. How will this affect the installation of the remote starter?

[CTScott]

Originally Posted by Eatoman

Thanks for the info CTScott. One last question: My car has a kill switch installed. How will this affect the installation of the remote starter?

The stater kill switch will need to be overridden by the remote starter, so the remote starter stater wire will need to connect to the "other side" of where the kill switch does its thing.

[Eatoman]

Ok, here's a little more info on my starter. It's a Prostart CT-3371, 2 in 1 remote starter with keyless entry. It's a 4 button remote which also includes trunk release. Would the trunk release option work on a hatchback Yaris?

[CTScott]

Originally Posted by Eatoman

Ok, here's a little more info on my starter. It's a Prostart CT-3371, 2 in 1 remote starter with keyless entry. It's a 4 button remote which also includes trunk release. Would the trunk release option work on a hatchback Yaris?

The trunk release would require additional hardware. It will lock/unlock as is, but to make it pop, would require a solenoid to "push" the button on the hatch and a set of poppers (spring loaded devices which lift the hatch a bit once the button is pressed).

[Eatoman]

Thanks again for the info! The trunk release isn't really a necessity for me, as long as it unlocks
I just got a quote from a Prostart certified technician. Here are the numbers:
Base installation: $135
Door Lock/Unlock wiring: $33

These prices don't include taxes.

So what do u think? Is it worth the price, or is it simple enough to take on as a DIY project? I have absolutely 0 skills in this sort of thing.

I guess I'll go ahead and pay for the installation - It'll save me the headaches!
Unless of course there's someone on this forum within the Montreal area who can do this at a cheaper price?