AEM FIC Tuning - Toyota Yaris Forums

Scubaru Steve · 01-20-2011, 01:03 PM

the reason im asking these questions is that im not used to tuning piggy backs, my wrx i can just hook in my laptop and open source tune my ecu, i have found no product to do it for the 1nzfe.

so now with this piggy back i get to try to tune.
i have been reading the book and i see that there is an afr-voltage table.
there is also something in there stating that you can install a resistor in the wiring so the fic can output the proper voltage to keep the stock ecu happy in closed loop. is that what clamping is called? when done to the o2 or maf?
at what cfm does the maf hit 5 volts? is it even possible with the t14?

as for open loop.... im sure its the same for all 1zfe's? when does it switch over from closed? i know wot is open...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aem fic	1.5ty	Forced Induction Forum	17	08-16-2015 08:22 PM
aem fic $280	1.5ty	Items for Sale by private party	1	10-22-2010 12:06 PM
Aem fic	1.5ty	Items for Sale by private party	24	10-05-2010 04:59 PM
AEM FIC works in Yaris......Sort of	cdydjded	Performance Modifications	32	12-06-2009 02:58 AM
AEM FIC works perfectly	cdydjded	Performance Modifications	58	08-03-2009 07:20 AM

01-20-2011, 01:03 PM	#4
Scubaru Steve Awesome! Drives: 12 Yaris/07 yaris Join Date: Dec 2010 Location: calgary Posts: 323	the reason im asking these questions is that im not used to tuning piggy backs, my wrx i can just hook in my laptop and open source tune my ecu, i have found no product to do it for the 1nzfe. so now with this piggy back i get to try to tune. i have been reading the book and i see that there is an afr-voltage table. there is also something in there stating that you can install a resistor in the wiring so the fic can output the proper voltage to keep the stock ecu happy in closed loop. is that what clamping is called? when done to the o2 or maf? at what cfm does the maf hit 5 volts? is it even possible with the t14? as for open loop.... im sure its the same for all 1zfe's? when does it switch over from closed? i know wot is open...