need help with amp and sub brands.....

[_S7V7N_]

What's the reason you want to trade out ? Is it old, not loud enough, or just have a few extra bucks and want something new.

Which alphasonics do you have the bottom line ones ? mid or the mack daddy top of the line one's

http://www.alphasonikinc.com/subwoofers.html

Reason i ask is the 600 and 800 look pretty beefy.

[wowitswil]

Originally Posted by _S7V7N_

What's the reason you want to trade out ? Is it old, not loud enough, or just have a few extra bucks and want something new.

Which alphasonics do you have the bottom line ones ? mid or the mack daddy top of the line one's

http://www.alphasonikinc.com/subwoofers.html

Reason i ask is the 600 and 800 look pretty beefy.

http://www.alphasonikinc.com/venclosures.html

i have the dual 10"
running an old pioneer 700...
i want more solid and powerful sound...

[_S7V7N_]

Dude to be honest, I would just try a bigger amp on them, i bet you weren't even hitting half the RMS. (get the model number of your pioneer and we can look that up ) I have been running the Hifonics Brutus Line and have been happy with there stuff. You're asking for Opinions so here's mine Everybody has there personal preference on audio, and i'm not gonna flame any other brand or believe mine is better, it's all on your own personal experience.

This is what i have and i'm pushing two 12 inch kicker comps with no problem @ 1 Ohm

They have an ebay, but these are the guys i ordered two amps from and were pretty good .. http://www.vminnovations.com/product...Amplifier.html



# Type: Mono Block
# 1-Ohm Power Rating 1x1200
# 2-Ohm Power Rating 1x900
# 4-Ohm Power Rating 1x450
# Turn-On Delay/ Mute
# Frequency Response @-3dB: 20-250Hz
# Damping Factor: >250
# Signal To Noise Ratio: > 95 dB
# THD + Noise: < 0.1%
# Variable Input Level Control (RCA/Unbalanced): 0.2V - 9V
# Variable Input Level Control (Mini DIN Balanced): 0.4V - 18V
# Input Impedance: 47k Ohm
# Input Impedance: 20k Ohm
# Power and Specific Diagnostics LEDs
# Protection DC, Short Circuit, Overload
# Power Supply - All MOSFET: Full PWM
# Power Output Circuit Type: Ultra-Fi MOSFET
# Variable Phase Shift
# Phase Change in Degrees: 0-+180
# Variable Low-Pass 24 dB Octave: 35Hz - 250Hz
# Variable Subsonic Filter: 15Hz - 35Hz
# Bass EQ: 0-+18 dB
# Balanced Inputs
# RCA Inputs
# RCA Line Outputs
# Remote Bass Module Included
# Gold Plated Power Terminal Blocks: 4 GA
# Dimensions : 11.42" x 9.45" x 2.52"