DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation - Page 10 - Toyota Yaris Forums

Bastnt · 10-27-2025, 03:04 PM

GIVING ADVICE TO AVOID A STUPID MISTAKE I MADE on my Toyota Yaris III (100 VVT-i Collection 5p, 2010–2015)

I spent a lot of time browsing forums to get the cruise control stalk to work on my car (the clutch switch and CC light on the instrument cluster were already in place).
The reason it wasn’t working was that I had wired it incorrectly in the steering wheel. At first, I plugged the stalk into the brown cable connector—it fit, but it was a bit smaller. Instead, I should have connected it where all the steering wheel cables meet (blue, brown, and yellow connectors). There was an empty slot there that perfectly matched the stalk connector.
For other Yaris models, you might need to install additional parts. Here’s a great step-by-step DIY guide:

https://www.toyotanation.com/attachm...iy-pdf.419080/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Cruise Control Available for 06/07 Yaris	TOYOTaejien	General Yaris / Vitz Discussion	8	08-27-2010 01:58 PM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 12:59 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM

10-27-2025, 03:04 PM	#1
Bastnt Drives: Toyota Yaris 3 100 VVT-i 2015 Join Date: Oct 2025 Location: France Posts: 2	GIVING ADVICE TO AVOID A STUPID MISTAKE I MADE on my Toyota Yaris III (100 VVT-i Collection 5p, 2010–2015) I spent a lot of time browsing forums to get the cruise control stalk to work on my car (the clutch switch and CC light on the instrument cluster were already in place). The reason it wasn’t working was that I had wired it incorrectly in the steering wheel. At first, I plugged the stalk into the brown cable connector—it fit, but it was a bit smaller. Instead, I should have connected it where all the steering wheel cables meet (blue, brown, and yellow connectors). There was an empty slot there that perfectly matched the stalk connector. For other Yaris models, you might need to install additional parts. Here’s a great step-by-step DIY guide: https://www.toyotanation.com/attachm...iy-pdf.419080/