|
03-28-2011, 10:35 AM | #127 |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
|
03-31-2011, 12:59 AM | #128 |
Drives: 2011 Toyota Yaris Join Date: Mar 2011
Location: Colorado Springs, CO
Posts: 51
|
1st post, just bought 2011 Yaris 3dr. Looking for coilovers as well. Are there any changes throughout the years that make some years incompatible with others?
|
03-31-2011, 09:55 AM | #129 |
Drives: 2011 Toyota Yaris Join Date: Mar 2011
Location: Colorado Springs, CO
Posts: 51
|
Think I'm gonna go with the FK coilovers from Vivid Racing. Calling today, having overnighted and will install this weekend if they're in stock. I'll post my thoughts if this all works out.
|
03-31-2011, 11:34 AM | #130 |
Drives: 2010 black yaris Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
|
nope.. only difference is with the sedan and the LB... but 4dr and 3dr LB are the same thru the years... SO FAR
|
03-31-2011, 11:42 AM | #131 |
Drives: 2011 Toyota Yaris Join Date: Mar 2011
Location: Colorado Springs, CO
Posts: 51
|
|
03-31-2011, 02:12 PM | #132 |
Drives: '10 3D Liftback Join Date: Mar 2010
Location: Mid-Turn (probably late apexing)
Posts: 66
|
|
03-31-2011, 02:34 PM | #133 |
Drives: 2011 Toyota Yaris Join Date: Mar 2011
Location: Colorado Springs, CO
Posts: 51
|
Ended up going with the Megans. FK's were in Germany and not in stock. Would've taken 4-6 weeks. Screw that.
|
03-31-2011, 05:48 PM | #134 |
Drives: 2010 black yaris Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
|
i dont know.. cali yaris could probably explain more about that since he sells both and probably could get his hands on them at the same time and tell you.. i think its the way they bolt up, and/or clearance
|
04-08-2011, 11:57 AM | #135 |
Drives: 2011 Toyota Yaris Join Date: Mar 2011
Location: Colorado Springs, CO
Posts: 51
|
2011 w/Megan coilovers installed. PITA with shitty directions.
|
04-23-2011, 10:41 PM | #136 |
Drives: 2009 3rd Polar white Join Date: Apr 2011
Location: Seattle
Posts: 31
|
Can't wait
I just bought a 2008 3 door LB that only has 13,200 miles on it. I don't even have the car yet, it has to be delivered from Denver to Seattle, but I have already ordered Megan Racing coil-overs (thanks for all the info here), upper front strut tower brace, lower front brace, and a rear spoier! I can't wait to get the car and start putting on parts!!
|
04-24-2011, 06:18 AM | #137 |
Drives: '09 Yaris & '10 Auris Join Date: Apr 2009
Location: Germany
Posts: 268
|
There is a new coilover kit for our Yaris. Maybe someone could add it to the first page of this thread. I am not sure if it gets available outside of Europe.
Bilstein B14 PSS Height-adjustable Preset dampening spring rates ??? http://www.bilstein.de/en/home.html Part number: 47-188044 Bilstein says their suspension system are all tested at Papenburg test track (40% property of Mercedes Benz) and at the famous Nürburgring Nordschleife. The shocks even have a small Nordschleife sticker on them. |
05-08-2011, 02:29 AM | #138 |
Drives: Yaris Join Date: May 2011
Location: CA
Posts: 3
|
Are there any good reputable coilovers for yaris rallyX? besides hotbits
|
06-01-2011, 03:43 PM | #139 |
http://www.speedalliance.com/catalog...at=2255&page=1
http://www.tanabe-usa.com/s0c.asp?id=6 TANABE SUSTEC PRO S-OC For 09-10 TOYOTA YARIS Year 09-10 Spring Rates F/R 4.0 / 3.0 Height Adj. F/R* +1/4~-1 3/4 / -1 1/4~-2 3/4 Part # TSC121 MSRP $990.00 Anyone? A buddy who has tracked a few different cars swears by these. Has anyone installed them? I don't see a link on the front page so I'm guessing not... |
|
06-01-2011, 03:49 PM | #140 | |
daily driver
|
Quote:
__________________
|
|
06-01-2011, 04:12 PM | #141 |
^THanks! I sent him a message.
|
|
06-07-2011, 11:12 AM | #142 |
Drives: '09 Yaris & '10 Auris Join Date: Apr 2009
Location: Germany
Posts: 268
|
Received my coilovers today. Its a H&R/Bilstein monotube coilover set.
Here are some pictures: Bilstein upside-down shocks in the front |
06-22-2011, 04:18 AM | #143 |
Hey guys so im looking for some coilovers on my yaris sedan. I need to sit low. I already understand that the ride quality will not be great at all and that is perfectly fine by me. Can anyone help me out
__________________
108hp and still rolling |
|
06-22-2011, 08:17 AM | #144 | |
USAF_SrA_E-4
|
the quality of the ride is fine by me its actually not that bad
__________________
Quote:
|
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OFFICIAL Yaris SEDAN thread | SimmZ | Photo-Video-Media Gallery | 1705 | 01-13-2020 11:20 AM |
Shift lever thread size | Chaad32 | Cosmetic Modifications (Exterior/Interior) | 16 | 01-30-2015 02:16 PM |
Shift Knob Thread Patter? | eight_heads | General Yaris / Vitz Discussion | 6 | 10-21-2009 10:25 AM |
Post Whores-aka Yaris chat thread | Black Yaris | Off-topic / Other Cars / Everything else Discussions | 21 | 07-12-2007 05:37 PM |
Thread request - Yaris is new in the US | makaluch | Cosmetic Modifications (Exterior/Interior) | 1 | 08-13-2006 12:16 AM |