DIY Cruise Control FAQ (2006-2010 Yaris)

[hayden]

Originally Posted by CTScott

That wire would be zero volts if disconnected. But, it could be connected when still and intermittently disconnected when the engine starts shaking it.

Reseated the pin, no luck. I'll try going out there and wiggling it while taking a reading to see if I can make it go to 0. Any other advice if that shows up fine though?

[CTScott]

Originally Posted by hayden

Reseated the pin, no luck. I'll try going out there and wiggling it while taking a reading to see if I can make it go to 0. Any other advice if that shows up fine though?

If that looks solid, work your way towards the stalk, verifying the connections along the way.