|
08-20-2009, 10:12 PM | #19 |
You need this , you can make it yourself , PM me or PM Garm if you want to buy one
Garm supplies these with the correct relay with his foglight kits. |
|
08-21-2009, 02:24 PM | #20 |
Drives: 09 Yaris 4Dr Sedan Join Date: Aug 2009
Location: Fargo, ND
Posts: 20
|
Thanks anyway, I out grew stuffed animals and plastic rulers last year and I don't want to risk a regression.
I will let you know if I can't find anything locally. Is it really necessary to use both pins? I can't see what benefit that would have when they are just connected to each other a few inches away from the connector. I was only planning on using 1 pin, unless I end up with that connector of course. The only extra power supply I have has all round and square pin connectors. Thanks |
08-21-2009, 03:22 PM | #21 | |
Drives: '08 LB MT Bayou Join Date: Oct 2008
Location: Colorado
Posts: 1,671
|
Quote:
Anyhow, here's a pic of the wires going to the relay plug. Not a lot of help, but you get the idea... these wires are connected to the contact pins of the relay included with my fog light kit. |
|
07-01-2011, 10:53 AM | #22 | |
1.5 or 2.5 both=0-60 in 8
|
Quote:
I bought a fog light kit from DT Moto from Ebay, the did not send me the relay that goes under the dash. What I understood is that switch powers the relay (close the contacts) using pin# 3 (headlight low beam)? and we can wire the contact points of the relay to the vertical pins of where the orgininal relay goes under the dash? Followed a lot of threads by you and other members, just want to make sure I know what I am doing. Thanks!
__________________
|
|
07-01-2011, 10:55 AM | #23 | |
1.5 or 2.5 both=0-60 in 8
|
Quote:
__________________
|
|
07-01-2011, 11:12 AM | #24 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
I have an extra one of the relays and the pins that you need for the under-hood fuse box, if you are interested.
__________________
|
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0 | goku87 | DIY / Maintenance / Service | 127 | 02-19-2023 07:01 PM |
DIY - Headlights off with the Ignition Switch | CTScott | DIY / Maintenance / Service | 46 | 11-03-2018 08:42 PM |
Part #s for Fog Light install? Can anyone who works for Toyota confirm? | IsLNdbOi | Cosmetic Modifications (Exterior/Interior) | 73 | 12-23-2010 05:15 PM |
a little fog light help please.... | 90tsi | DIY / Maintenance / Service | 6 | 07-22-2009 11:46 AM |
fog light install experts please help | tber | DIY / Maintenance / Service | 5 | 02-26-2009 02:47 PM |