![]() |
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 08 Yaris Sedan Join Date: Oct 2008
Location: California - Bay Area
Posts: 2,773
|
Most electronic parts such as starters and altenators for toyota are all made by denso which is a really good quality part. Lot better than bosch and some of the other manufactures. Which is also why they typically cost more even for a remand. You say the voltage is at 14.1 which is no indicator that the altenator is bad. Most cars range from high 13.5-14.0 Also when you rotate the pulley for the altenator there is going to be a slight resistance its not going to spin like a idler pulley. Actually its more likely a idler pulley would go bad first. What i would do is with the belt removed start the car and see if the sound is gone 100 percent then you know for sure its an accessorie thats causing your sound.
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What do you guys use to clean dust? | JerseyJeff84 | DIY / Maintenance / Service | 13 | 03-30-2011 01:37 AM |
| Dust sucked in everywhere! | Dylan | DIY / Maintenance / Service | 2 | 10-25-2010 02:10 PM |
| WTB:OEM rear shock dust covers with bumpstops | DeathBeard | Willing to Buy by private party | 0 | 09-02-2010 12:16 PM |
| set in cement dust | centrysis | Wash, Wax, Detailing, Exterior Repairs | 6 | 07-01-2010 07:45 PM |
| EBC Rotors/PADS | CorSport | CorSport | 0 | 07-10-2009 07:30 PM |