Yaris Sedan Deadening and Sound system upgrade - Page 78 - Toyota Yaris Forums

sqcomp · 07-18-2011, 11:33 AM

He he! You know my quest...POWER! You've upgraded your grounds and the alty to battery, right?

Now...to the pillars.

How's the transition between the filler and the plastic? Is it smooth? Truly? I had to bring that line up a bit more than you have yours. The red marks are to bring attention to spots that you need to work on?

sqcomp · 07-18-2011, 11:36 PM

More spurring for you D...Get crackin' on your $hit!

^The speakers are back in...

derickveliz2 · 07-19-2011, 12:13 AM

Quote:

Originally Posted by sqcomp

He he! You know my quest...POWER! You've upgraded your grounds and the alty to battery, right?

Now...to the pillars.

How's the transition between the filler and the plastic? Is it smooth? Truly? I had to bring that line up a bit more than you have yours. The red marks are to bring attention to spots that you need to work on?

Yes I did a Big 3, you help me do it! LOL

Transition it's smooth, of course it can get better (it will), I'm concern on how to finish them... Primer, texture, paint or flock?

Yes the red marks are from a previous Bondo/Sanding in my attempt to fill valleys and little imperfections.

D.

derickveliz2 · 07-19-2011, 12:41 AM

.

Thinking about the power...

At 40MPH - under 2,000 RPMs - fifth gear - flat road - Lights on - AC cranking full power - HU on at max volume - Spanish pop music playing - =

13.8 volts according to the P99s volt meter.

.

derickveliz2 · 07-19-2011, 12:52 AM

Quote:

Originally Posted by sqcomp

More spurring for you D...Get crackin' on your $hit!

^The speakers are back in...

That's a very strange spare tire... LOL

The L4SE's have a nice sexy BUTT.

Mmm... you still need front and rear spoiler, ground effects, eye lids, front grill, shark fin antenna (fake), allow wheels, Lowering springs, SSK, etc ... JKD . (o:

I know your install is much fancier and nicer than mine, but I'll let you have the best sound system on a Yaris!

on that side of the continent! jeje and I forgot... RED looks faster!

D.

derickveliz2 · 07-19-2011, 02:12 AM

It's hot and humid down stairs!

I did sand last night glaze coat! easier to sand than bondo, after 3 layers of bondo I'm done with bondo!

added another layer of glaze so I have something to sand tomorrow. Every layer makes the a-pillar look better.

D.

sqcomp · 07-19-2011, 05:08 AM

You know...you're right. With all the exterior enhancements, I think you've got the best looking yaris. I really need to do that stuff next. You don't mind if I make your car's twin in flint micha do you?

That glazing putty is easy stuff (fun) to work with. I'm anxious to hear your impressions of that Q amp.

derickveliz2 · 07-19-2011, 05:22 AM

Quote:

Originally Posted by sqcomp

You know...you're right. With all the exterior enhancements, I think you've got the best looking yaris. I really need to do that stuff next. You don't mind if I make your car's twin in flint micha do you?

That glazing putty is easy stuff (fun) to work with. I'm anxious to hear your impressions of that Q amp.

No I don't mind at all!

you can also copy Kaotic and Herb! other awesome, good looking sedans in the continent! to be honest Kaotic's Yaris was the inspiration to do mine.

Q amp... me too but...I need 2 fuses (came without fuses) and I'm trying to find out how many amps each...

D.

derickveliz2 · 07-23-2011, 02:42 PM

For now, more sanding and a couple of layers of primer, I did open a hole for the L1v2s but the thickness of the glass didn't let me use the plywood baffle behind, but all is good.

I'll upload pictures later for the record.

(o:

sqcomp · 07-23-2011, 06:55 PM

...and after installing the passenger's side a-pillar...I think I've messed with it SO much that it's not clicking in anymore. Yikes! I'm replacing the white switch clips on Monday. If that doesn't work, I'll try to use my grill guide magnets to try and attach them that way...

Pray for me. I REALLY don't want to have to redo my right side a-pillar.

derickveliz2 · 07-24-2011, 02:36 AM

sqcomp... that's scary, is that due to the on/off of the a-pillars? the left one is getting easier to take off every time, I think I should get new clips too!

D.

sqcomp · 07-24-2011, 04:00 AM

Wait! I've already ordered 4.

I actually figured out what the issue was. It was how I was running my wiring on that side of the car's pillar. It finally hit me this afternoon. I had something like 15 minutes after coming home from Army drill...before taking a girlie out to the Kenny Chesney concert. I sat there and looked at the pillar and notice a bow in the center. It was one of those moments where you're like, WTF!? I looked at the other pillar, sighed and took off the pillar. I sat there looking at the wiring and just moved it from the position I had it into what seemed like it would obstruct the pillar even more. Nope! It fell right into place like it was supposed to be there the whole time. Now it's almost like new! Go figure. After two years of struggling with the pillar on that side, I finally have it right.

I'll still replace the two, I can probably just drop you the other two just for the hell of it.

derickveliz2 · 07-24-2011, 09:33 PM

Yeah! thanks,
I need to commit my self and try hard to contact Jim for the I6SW, every time I call him... he is out, I can't get hold of him!

D.

sqcomp · 07-24-2011, 10:10 PM

You know you can talk to Aaron too...

I'll be there tomorrow working on the woofer enclosure and the Bit One. I talked to Stan from DC Power, they're trying to get the alternator out to me on the 12th. He mentioned that they were machining the body of the alternator on Friday. Go figure, apparently you do get what you pay for. We'll see when we install it.

derickveliz2 · 07-25-2011, 12:45 AM

Pictures... "Work in Progress"

.

derickveliz2 · 07-25-2011, 12:51 AM

Quote:

Originally Posted by sqcomp

You know you can talk to Aaron too...

I'll be there tomorrow working on the woofer enclosure and the Bit One. I talked to Stan from DC Power, they're trying to get the alternator out to me on the 12th. He mentioned that they were machining the body of the alternator on Friday. Go figure, apparently you do get what you pay for. We'll see when we install it.

Thanks, I'll get in touch with them tomorrow.

Looks like you are getting a super alternator upgrade! keep us posted!

D.

derickveliz2 · 07-25-2011, 12:57 AM

Tweeter Gap...

Filling in the space! I learned this Technic securing servos into Foam wings of my r/c airplanes, forgot how we call it, but it's simple and works.

derickveliz2 · 07-25-2011, 01:01 AM

1st attempt to get some texture, final a-pillar finish will be black to hide away speakers. A little stealth factor in my equation!

D.

07-18-2011, 11:33 AM	#1387
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	He he! You know my quest...POWER! You've upgraded your grounds and the alty to battery, right? Now...to the pillars. How's the transition between the filler and the plastic? Is it smooth? Truly? I had to bring that line up a bit more than you have yours. The red marks are to bring attention to spots that you need to work on? __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

07-18-2011, 11:36 PM	#1388
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	More spurring for you D...Get crackin' on your $hit! ^The speakers are back in... __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

07-19-2011, 12:41 AM	#1390
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	. Thinking about the power... At 40MPH - under 2,000 RPMs - fifth gear - flat road - Lights on - AC cranking full power - HU on at max volume - Spanish pop music playing - = 13.8 volts according to the P99s volt meter. . __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

07-19-2011, 02:12 AM	#1392
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	It's hot and humid down stairs! I did sand last night glaze coat! easier to sand than bondo, after 3 layers of bondo I'm done with bondo! added another layer of glaze so I have something to sand tomorrow. Every layer makes the a-pillar look better. D. __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

07-19-2011, 05:08 AM	#1393
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	You know...you're right. With all the exterior enhancements, I think you've got the best looking yaris. I really need to do that stuff next. You don't mind if I make your car's twin in flint micha do you? That glazing putty is easy stuff (fun) to work with. I'm anxious to hear your impressions of that Q amp. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

07-23-2011, 02:42 PM	#1395
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	For now, more sanding and a couple of layers of primer, I did open a hole for the L1v2s but the thickness of the glass didn't let me use the plywood baffle behind, but all is good. I'll upload pictures later for the record. (o: __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

07-23-2011, 06:55 PM	#1396
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	...and after installing the passenger's side a-pillar...I think I've messed with it SO much that it's not clicking in anymore. Yikes! I'm replacing the white switch clips on Monday. If that doesn't work, I'll try to use my grill guide magnets to try and attach them that way... Pray for me. I REALLY don't want to have to redo my right side a-pillar. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

07-24-2011, 02:36 AM	#1397
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	sqcomp... that's scary, is that due to the on/off of the a-pillars? the left one is getting easier to take off every time, I think I should get new clips too! D. __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

07-24-2011, 04:00 AM	#1398
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	Wait! I've already ordered 4. I actually figured out what the issue was. It was how I was running my wiring on that side of the car's pillar. It finally hit me this afternoon. I had something like 15 minutes after coming home from Army drill...before taking a girlie out to the Kenny Chesney concert. I sat there and looked at the pillar and notice a bow in the center. It was one of those moments where you're like, WTF!? I looked at the other pillar, sighed and took off the pillar. I sat there looking at the wiring and just moved it from the position I had it into what seemed like it would obstruct the pillar even more. Nope! It fell right into place like it was supposed to be there the whole time. Now it's almost like new! Go figure. After two years of struggling with the pillar on that side, I finally have it right. I'll still replace the two, I can probably just drop you the other two just for the hell of it. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

07-24-2011, 09:33 PM	#1399
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	Yeah! thanks, I need to commit my self and try hard to contact Jim for the I6SW, every time I call him... he is out, I can't get hold of him! D. __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

07-24-2011, 10:10 PM	#1400
sqcomp Roadrunner Jr. View User's Garage Drives: 2007 Yaris S Join Date: Jan 2007 Location: Back at home Posts: 2,609	You know you can talk to Aaron too... I'll be there tomorrow working on the woofer enclosure and the Bit One. I talked to Stan from DC Power, they're trying to get the alternator out to me on the 12th. He mentioned that they were machining the body of the alternator on Friday. Go figure, apparently you do get what you pay for. We'll see when we install it. __________________ “To argue with a person who has renounced the use of reason is like administering medicine to the dead.” ― Thomas Paine

07-25-2011, 12:45 AM	#1401
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	Pictures... "Work in Progress" . __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

07-25-2011, 12:57 AM	#1403
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	Tweeter Gap... Filling in the space! I learned this Technic securing servos into Foam wings of my r/c airplanes, forgot how we call it, but it's simple and works. __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

07-25-2011, 01:01 AM	#1404
derickveliz2 View User's Garage Drives: Yaris Sedan "S" Join Date: Oct 2008 Location: Central, MA Posts: 2,722	1st attempt to get some texture, final a-pillar finish will be black to hide away speakers. A little stealth factor in my equation! D. __________________ . My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sound deadening: sq footage amount for 3dr	goku87	In Car Entertainment + Electronics (audio / video / alarm)	29	11-14-2013 01:37 PM
2007 Yaris S Sound Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	70	12-13-2010 08:40 PM
Sound deadening	06vitzRS	General Yaris / Vitz Discussion	10	05-05-2010 02:51 PM
Sedan Door Panel Deadening	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	42	06-01-2009 03:47 PM