Fishing an AV wire down B pillar - Toyota Yaris Forums

redyaris · 03-05-2007, 11:38 AM

Im installing a Sony PS2 system under the right front pax seat on the floor.

I want to run an AV (2 plug) output wire from my new DVD system mounted at the dome light down to the right front passenger seat floor via the right B pillar...I have fish tape to use for this.

Question: what will I run into in the roof? In the pillar? Is the B pillar trim easy to remove? How do I do this?

punch · 03-05-2007, 05:09 PM

Quote:

Originally Posted by redyaris

Im installing a Sony PS2 system under the right front pax seat on the floor.

I want to run an AV (2 plug) output wire from my new DVD system mounted at the dome light down to the right front passenger seat floor via the right B pillar...I have fish tape to use for this.

Question: what will I run into in the roof? In the pillar? Is the B pillar trim easy to remove? How do I do this?

yes it should just pry off, no big issue.

spkrman · 03-05-2007, 11:35 PM

easy, panel pops off and the clips dont break.

redyaris · 03-06-2007, 03:03 PM

Will I have to unscrew the seat belt bolt?

spkrman · 03-10-2007, 07:17 PM

Quote:

Originally Posted by redyaris

Will I have to unscrew the seat belt bolt?

yea definitely.

IllusionX · 03-06-2007, 03:31 PM

i know with my echo, i had to unscrew the seat belt bold to completely remove the B pillar. i haven't really looked into the yaris, but i imagine them to be the same.

but you really want to FISH, or just remove the pillar and have the whole access to put your wire??

redyaris · 03-09-2007, 11:59 AM

I bought the fish tape for the roof section. I dont know what I will run into in there from dome light opening over to B pillar. Perhaps Violin can advise from his moon roof install...im not too worried about the B pillar if the trim does indeed pop off and on easily.

I love this forum!

03-05-2007, 11:38 AM	#1
redyaris Shiny Chromey Coolness View User's Garage Drives: 2007 Toyota Yaris Liftback Join Date: Feb 2007 Location: Orlando, FL Posts: 982	Fishing an AV wire down B pillar Im installing a Sony PS2 system under the right front pax seat on the floor. I want to run an AV (2 plug) output wire from my new DVD system mounted at the dome light down to the right front passenger seat floor via the right B pillar...I have fish tape to use for this. Question: what will I run into in the roof? In the pillar? Is the B pillar trim easy to remove? How do I do this? __________________ Bringin the Bling to Yarisworld

03-06-2007, 03:03 PM	#4
redyaris Shiny Chromey Coolness View User's Garage Drives: 2007 Toyota Yaris Liftback Join Date: Feb 2007 Location: Orlando, FL Posts: 982	Will I have to unscrew the seat belt bolt? __________________ Bringin the Bling to Yarisworld

03-09-2007, 11:59 AM	#7
redyaris Shiny Chromey Coolness View User's Garage Drives: 2007 Toyota Yaris Liftback Join Date: Feb 2007 Location: Orlando, FL Posts: 982	I bought the fish tape for the roof section. I dont know what I will run into in there from dome light opening over to B pillar. Perhaps Violin can advise from his moon roof install...im not too worried about the B pillar if the trim does indeed pop off and on easily. I love this forum! __________________ Bringin the Bling to Yarisworld

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What's the difference in the Door lock Kits (wire and rod)	mgthompson	General Yaris / Vitz Discussion	5	03-19-2007 02:29 AM
Dimmer Wire for Tach	mrrock	DIY / Maintenance / Service	7	11-29-2006 08:18 PM
Illimuination wire	KSIbucky	DIY / Maintenance / Service	2	10-15-2006 09:05 PM
Harman Kardon Drive + Play for IPOD	sroberts	In Car Entertainment + Electronics (audio / video / alarm)	5	07-01-2006 02:05 PM
unknown wire?	got615	DIY / Maintenance / Service	0	05-01-2006 01:24 AM

03-05-2007, 11:35 PM	#3
spkrman Banned View User's Garage Drives: 1 Join Date: Nov 2006 Location: 2 Posts: 1,476	easy, panel pops off and the clips dont break.

03-06-2007, 03:31 PM	#6
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	i know with my echo, i had to unscrew the seat belt bold to completely remove the B pillar. i haven't really looked into the yaris, but i imagine them to be the same. but you really want to FISH, or just remove the pillar and have the whole access to put your wire??