Port Flow's TBR Racing Head - Toyota Yaris Forums

Viperoni · 08-12-2011, 02:37 AM

Proper head work is not cheap, and is worth it.
Can't wait to see the flowbench numbers!!!

mazilla · 08-12-2011, 11:19 AM

Quote:

Originally Posted by Viperoni

Proper head work is not cheap, and is worth it.
Can't wait to see the flowbench numbers!!!

5K is so over the top it's almost laughable. Unless it takes over 50 hours to complete...

I had my 351 Cleveland 4V Heads worked out for half that, and it's double the work.

Be Spoken · 08-12-2011, 11:45 AM

Here's the break - down

Cause the work is not 5,200 it's the whole head.

800.00 for head new from TRD
1,600.00 JUN cams
1,300.00 titanium Ferrera valve train gas filled valves
1,500.00 for Tom Fujita to do the head work and lash.

You get what you pay for. And were not talking common V8 stuff.

And way to go, moc the most renouned head builder in the industry. What are we 5 years old?

mazilla · 08-12-2011, 01:31 PM

Quote:

Originally Posted by Be Spoken

Here's the break - down

Cause the work is not 5,200 it's the whole head.

800.00 for head new from TRD
1,600.00 JUN cams
1,300.00 titanium Ferrera valve train gas filled valves
1,500.00 for Tom Fujita to do the head work and lash.

You get what you pay for. And were not talking common V8 stuff.

That's a reasonable breakdown, and $1,500 is about right IMO. I miss-interpreted the OP to mean the head work alone was $5,200. You can understand why I was skeptical...

A side note, the Cleveland is not "common V8" but I wouldn't expect a lot of the people here to know that...not really their cup of tea.

ROCKLANDTOYOTA · 08-12-2011, 01:58 PM

Quote:

Originally Posted by mazilla

A side note, the Cleveland is not "common V8" but I wouldn't expect a lot of the people here to know that...not really their cup of tea.

common would be the windsor.....

Be Spoken · 08-12-2011, 02:23 PM

TBR has video up on you tube labeled
500 hp 1nzfe build part 1

Check it out. The parts are amazing.

I think that's xbgod in the video.

Flipper_1938 · 08-13-2011, 10:04 PM

Quote:

Originally Posted by Be Spoken

TBR has video up on you tube labeled
500 hp 1nzfe build part 1

Check it out. The parts are amazing.

I think that's xbgod in the video.

No luck finding that. Can you post a link to it?

Viperoni · 08-14-2011, 10:19 PM

Quote:

Originally Posted by mazilla

That's a reasonable breakdown, and $1,500 is about right IMO. I miss-interpreted the OP to mean the head work alone was $5,200. You can understand why I was skeptical...

A side note, the Cleveland is not "common V8" but I wouldn't expect a lot of the people here to know that...not really their cup of tea.

For $5200 you could probably get a LQ4, 4L60E, a megagizz to run it all and probably a Ford 9" too... but it wouldn't be the same :)

08-12-2011, 02:37 AM	#1
Viperoni Drives: 2005 Toyota Echo Join Date: Aug 2010 Location: Brampton, ON Posts: 505	Proper head work is not cheap, and is worth it. Can't wait to see the flowbench numbers!!! __________________ 2006 Saturn Ion Redline 2005 Toyota Echo RS 4dr hatch - Cyl #3 bad - sold 2000 Toyota Echo 2dr coupe - The track car - rusty & scrapped

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Head/ TB / Spacers / Turbo and Other thing	xbgod	Items for Sale by private party	33	11-08-2010 12:52 AM
Rim Weights	bosbik	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	11-14-2009 07:42 PM
Possible Group Buy.. Racing Seats, Intakes?	TinyGiant	Items for Sale by private party	60	09-11-2009 03:40 PM
12/20/08 Buddy Club USA 5th Anniversary Clearance SALE	DuckinOut	California	3	12-18-2008 01:25 AM
What type of head unit with AUX port?	ebowers83	In Car Entertainment + Electronics (audio / video / alarm)	3	11-06-2006 11:21 AM

08-12-2011, 11:45 AM	#3
Be Spoken Banned Drives: xb Join Date: Jul 2011 Location: fl Posts: 18	Here's the break - down Cause the work is not 5,200 it's the whole head. 800.00 for head new from TRD 1,600.00 JUN cams 1,300.00 titanium Ferrera valve train gas filled valves 1,500.00 for Tom Fujita to do the head work and lash. You get what you pay for. And were not talking common V8 stuff. And way to go, moc the most renouned head builder in the industry. What are we 5 years old?

08-12-2011, 02:23 PM	#6
Be Spoken Banned Drives: xb Join Date: Jul 2011 Location: fl Posts: 18	TBR has video up on you tube labeled 500 hp 1nzfe build part 1 Check it out. The parts are amazing. I think that's xbgod in the video.