![]() |
![]()
![]() |
![]() |
#55 |
![]() ![]() ![]() ![]() ![]() Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008
Location: LI, New Yawk
Posts: 2,063
|
I took the easy route. Got the factory power pkg for $1280 back in '08 when I bought my car. Money well spent with factory warr and parts!
__________________
![]() Never take eyes off opponent - Bruce Lee |
![]() |
![]() |
![]() |
#56 |
![]() Drives: Charcoal '08 sedan Join Date: Sep 2011
Location: United States
Posts: 17
|
Help for a newb
I'm in the process of going from completely manual to power locks. My question is if my car has none of the lock/unlock wire in the 20 pin connector, do I need to tap in there or can I just run the wires straight from the power lock "brain" to the actuators?
Thanks. |
![]() |
![]() |
![]() |
#57 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
__________________
![]() |
|
![]() |
![]() |
![]() |
#58 |
![]() Drives: Charcoal '08 sedan Join Date: Sep 2011
Location: United States
Posts: 17
|
Thanks for the quick response. I'm sure I'll have more questions along the way but for now I got the extra wiring at Autozone and should be ready for an afternoon of fun
![]() |
![]() |
![]() |
![]() |
#59 |
![]() Drives: Charcoal '08 sedan Join Date: Sep 2011
Location: United States
Posts: 17
|
And back with more questions...
Okay, I've hit my first wall. I'm using the Black Widow 852 kit by the way in case it needs referenced. Install manual here (http://www.blackwidowsecurity.com/in...%20Install.pdf).
I'm not trying anything fancy, just running the wires straight to the actuators that came with the kit. I've tried connecting the common unlock wire (black/green) on the brain to the green wire on the actuator and the common lock wire (blue/black) on the brain to the blue wire on the actuator. The brain clicks and the horn honks (once for lock; twice for unlock) but the actuator doesn't move. I've tried every combination of the other two possible lock and unlock wires and even switch blue/green and the actuator won't move. Any ideas? I only hooked up one for now because I wanted to make sure the wiring was right. Do I need to hook up the other three for them to work? Thanks. |
![]() |
![]() |
![]() |
#60 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
__________________
![]() |
|
![]() |
![]() |
![]() |
#61 |
![]() Drives: Charcoal '08 sedan Join Date: Sep 2011
Location: United States
Posts: 17
|
Well I just found out that what I thought was a 12v on the fuse panel was a nothing so I switched the violet/black-violet to one that I think is now 12v. Off to reconnect the brown/brown-black to ground. I'll be right back.
Thanks again. |
![]() |
![]() |
![]() |
#62 |
![]() Drives: Charcoal '08 sedan Join Date: Sep 2011
Location: United States
Posts: 17
|
Weird. I grounded the brown-black/white-black as per the diagram and then hit the remote and nothing happened. So I checked my 12 volt connections and when I unplugged it and plugged it back in, I now have a long horn honk on either button (unlock/lock) instead of the correct horn honks. Maybe I have to reprograme it now. Either way, it's getting late so the horn probably isn't helping the neighborhood. I'll throw in the towel tonight but man I hope I can figure this out by Thursday (inspection).
Thanks. |
![]() |
![]() |
![]() |
#63 |
![]() Drives: Charcoal '08 sedan Join Date: Sep 2011
Location: United States
Posts: 17
|
One more thing. On the recommendation of Dan Q (here), I tapped into a 12v for the power with a spade plug at the fuse box.
For the violet/violet-black I used a different spade plug in the fuse box. Should I instead splice-tap into the one I know for sure is a 12v (i.e. tap the red power wire I already know works)? Thanks. |
![]() |
![]() |
![]() |
#64 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
__________________
![]() |
|
![]() |
![]() |
![]() |
#65 |
![]() Drives: Charcoal '08 sedan Join Date: Sep 2011
Location: United States
Posts: 17
|
I plan to get the meter out at lunch to check but once I find one 12v constant, I'm just going to link everything up to it with splices. Everything has fuses and I just want to make sure everything is getting power. Either that or I'll tie in one to the 12v on the fuse box and tie the violet/violet-black to the yellow on the ignition. Hopefully something with work.
Thanks as always. |
![]() |
![]() |
![]() |
#67 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
__________________
![]() |
|
![]() |
![]() |
![]() |
#68 |
![]() Drives: Charcoal '08 sedan Join Date: Sep 2011
Location: United States
Posts: 17
|
Pictures
Onward and upward. I started from scratch so as to make sure all the wires were connected as they should and found that I had not connected the black ground wire (duh).
Anyway, when I finished re-wiring everything, the actuators now work BUT.... both buttons on the remote lock the car when blue/black (brain) is connected to blue (actuator) and green/black (brain) is connected to (green) actuator. If I swap them on the actuator wires, both remote buttons unlock the car. Obviously I want one button to lock and the other to unlock. I've attached some pictures but at this point I think it's just a right wire, right place issue. |
![]() |
![]() |
![]() |
#69 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Your +12V connection of the violet wires should be to the top terminal in the connector between the single blue and the huge single black wires.
__________________
![]() |
![]() |
![]() |
![]() |
#70 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
From what I can see in the two pics:
Brown/White horn output - OK Black/Yellow dome light output - OK Red +12 Power - should be connected along with Violet wires to correct +12 terminal Yellow Ignition switched +12 - Can't tell from your pic, but it should be connected to the pink wire on the Ignition switch connector.
__________________
![]() |
![]() |
![]() |
![]() |
#71 | |
![]() Drives: Charcoal '08 sedan Join Date: Sep 2011
Location: United States
Posts: 17
|
Quote:
Thanks, CTScott, you are the man. I'm also consulting the dealer who sold it to me so hopefully between both, I can figure out what's up. |
|
![]() |
![]() |
![]() |
#72 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
For the red, your module wants to see unswitched power on that wire.
__________________
![]() |
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
When will the Yaris hit the showrooms at dealers? | Petrolhead | New YARIS Purchase Forum | 181 | 11-28-2011 07:03 AM |
Questions and advice required about power upgrading(windows & locks) | W.A.S.P | DIY / Maintenance / Service | 10 | 07-22-2009 02:59 AM |
Need Help - Electrical (finding Power) | Ayka | DIY / Maintenance / Service | 7 | 10-12-2006 11:51 AM |
The power upgrade thread | ChinoCharles | DIY / Maintenance / Service | 19 | 09-27-2006 03:14 PM |
Custom Sub Enclosure (inc sub, power cap, amp) | wado | Items for Sale by private party | 3 | 09-18-2006 11:53 AM |