DIY: Heated Seats for 2006-2011 Yaris

[monbonlupin]

Scott,

I'm about to install a remote starter and heated seats. In your DIYs you recommend to wire the power to an unused fuse location. How can I wire the remote and 2 heated seats to that location ? What wire gauge should I use ? Some pics would be great !

Thanks for the awesome DIYs.

[CTScott]

Originally Posted by monbonlupin

Scott,

I'm about to install a remote starter and heated seats. In your DIYs you recommend to wire the power to an unused fuse location. How can I wire the remote and 2 heated seats to that location ? What wire gauge should I use ? Some pics would be great !

Thanks for the awesome DIYs.

Page 13 of the DIY shows a picture of both the seat heaters and my remote starter wired to the female spade terminal that connects to that unused fuse position. The female spade needs to be rated for the size/number of wires that it will hold. In my case, the remote starter power wire and the relay socket wire were both 16 AWG, so the 12 AWG female spade terminal was the correct size for two 16 AWG wires.