![]() |
|
|
|
|
|
#1 | |
|
School'er of hard knocks
Drives: Silver Yaris 4dr. HB Join Date: Oct 2008
Location: Sudbury, On
Posts: 556
|
Quote:
Just another nail in the coffin proving my theory that the Yaris is the furthest thing ever from the reliable Echo... derickveliz2: I was under the impression the hub had to be removed to access these wires. Yay or nay? |
|
|
|
|
|
|
#2 | |
|
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
Quote:
You need a small screwdriver or something to help get the clip off if I'm not mistaken. It was a while ago now. |
|
|
|
|
|
|
#3 | ||
![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
Yes and No... It helps to fix them if you remove the hub, but 1 side had 2 wires broken all ready like you see in the pictures above, the other side only one wire was broken. I did remove them both. no access to the wires from the inside of the hubs, it's where the wires go into the hub. I hope I didn't confuse you? Quote:
"NO MORE LIGHTS FOR ME!!! and I spend nothing but my time. Lets see when they will turn on again! D.
__________________
. CLA 250, 4MATIC |
||
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|