cld tiles

[derickveliz2]

Originally Posted by Crackerballer

Derick I want to bump this and ask if you think 2 tiles per door will help with road noise and some help to sound quality. I am mainly looking to eliminate road noise, so not anywhere as extreme as what you're doing, but just a bit quieter. I was thinking of doing the doors and the floor. Not going to tackle the firewall, may also do the spare wheel well and trunk too. Thanks.

CB...

2 CLD Tiles per door it will do almost nothing that you could perceive while driving,
blocking road noise is more of a "ON" / "OFF" thing CLD Tiles will prevent large flat sheet panels to reverberate but CLD Tiles alone will not block noise.

These 2 CLD Tiles help making the door a better speaker enclosure, but for that I would use MAT, a cheaper version of CLD Tiles and conver as much
surface as possible inside the door.

A layer of MLV with your 2 CLD Tiles per door and a thin layer of CCFoam will do what you want.

Covering the entire floor + wheel wells makes a big difference in road noise.

FYI, I used 5 CLD Tiles and maybe 24" of Rope, per door and losts of MAT.
(plus a layer of MLV, and CCFoam).

D.

[yojabbajabba]

Originally Posted by derickveliz2

CB...

FYI, I used 5 CLD Tiles and maybe 24" of Rope, per door and lots of MAT.
(plus a layer of MLV, and CCFoam).

D.

When doing the doors, where did you apply the RAAMMat? I understand how the CLD Tiles work, and where that goes (and how much) but in this entire SQ/road-noise-kill build I haven't figured out WHERE and WHY you are using MAT?

Thanks Derick.