DIY Cruise Control FAQ (2006-2010 Yaris) - Toyota Yaris Forums

2greek4u · 03-06-2012, 05:57 PM

Scott, do you by any chance have anymore switches available?

CTScott · 03-06-2012, 06:19 PM

Quote:

Originally Posted by 2greek4u

Scott, do you by any chance have anymore switches available?

Yes.

Nicfin · 03-07-2012, 08:04 PM

I am still in the process of preparing to install the OEM cruise control on my 08 liftback. I was going to use tap splices for the blue and white wires that attach to the plug under the fuse box, which are for the clutch cancel. I was wondering if it was possible to pull the plug and push out the blue and white wire connectors from underneath? If so, I could solder a wire to the very top of each connector without affecting anything else and then reinstall it.

Does anyone know if the little connectors in the plug have a release mechanism? I figured they are not made to remove, but I thought perhaps Scott or someone else might know.

CTScott · 03-07-2012, 09:44 PM

Quote:

Originally Posted by Nicfin

I am still in the process of preparing to install the OEM cruise control on my 08 liftback. I was going to use tap splices for the blue and white wires that attach to the plug under the fuse box, which are for the clutch cancel. I was wondering if it was possible to pull the plug and push out the blue and white wire connectors from underneath? If so, I could solder a wire to the very top of each connector without affecting anything else and then reinstall it.

Does anyone know if the little connectors in the plug have a release mechanism? I figured they are not made to remove, but I thought perhaps Scott or someone else might know.

The pins are removable. You have to use a small flat object and slide it along the top edge of the pin to release the plastic locking tab that keeps the pin from sliding out.

Nicfin · 03-07-2012, 10:39 PM

Scott, thanks for the quick reply.

That's good to know. Maybe when I can find the time, I can get it installed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 12:59 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM
Using Cruise control	Driver	General Yaris / Vitz Discussion	14	11-09-2006 11:12 PM

03-06-2012, 05:57 PM	#1
2greek4u Drives: 2008 5HB LE Join Date: Feb 2012 Location: Montreal,QC Posts: 13	Scott, do you by any chance have anymore switches available?

03-07-2012, 08:04 PM	#3
Nicfin Nic Drives: 2008 3-Door Liftback Manual Join Date: Jan 2012 Location: Alabama Posts: 51	I am still in the process of preparing to install the OEM cruise control on my 08 liftback. I was going to use tap splices for the blue and white wires that attach to the plug under the fuse box, which are for the clutch cancel. I was wondering if it was possible to pull the plug and push out the blue and white wire connectors from underneath? If so, I could solder a wire to the very top of each connector without affecting anything else and then reinstall it. Does anyone know if the little connectors in the plug have a release mechanism? I figured they are not made to remove, but I thought perhaps Scott or someone else might know.

03-07-2012, 10:39 PM	#5
Nicfin Nic Drives: 2008 3-Door Liftback Manual Join Date: Jan 2012 Location: Alabama Posts: 51	Scott, thanks for the quick reply. That's good to know. Maybe when I can find the time, I can get it installed.