Yaris Sedan Deadening and Sound system upgrade

[sqcomp]

It came down to the center image. I was getting some funky phasing issues being on axis. I spent about 6 hours moving each set of speakers around, muting all the others, and searching for the center image. I found it. It turns out to be along the same aiming I had in my first iteration last year.

That's why I mentioned it coming full circle. The biggest difference is in the separation of the mids and tweeters. Still, even in the mids I have similar aiming as when they were in the pillars.

Some things are simply strange to me. I need to get this rocking. I have a USACi show on the 27th of May and on the 3rd of June. Then it's planning for a show at Streamline later in the year. D, I want to send you my ID8 in the enclosure I made for my wife's truck. I'm telling you, you'd LOVE the response from this little thing. This little thing is accurate...and downfiring?! It loads off the floor of the car and feels like you've got bass shakers in your seat without ANY slop whatsoever.

[derickveliz2]

Originally Posted by sqcomp

D, I want to send you my ID8 in the enclosure I made for my wife's truck. I'm telling you, you'd LOVE the response from this little thing. This little thing is accurate...and downfiring?! It loads off the floor of the car and feels like you've got bass shakers in your seat without ANY slop whatsoever.

I'm sure the i6sw will give your ID8 some thing to talk about!

I just can't believe it's just a 6.5 inch woofer what I have.

D.

[talnlnky]

Originally Posted by sqcomp

It came down to the center image. I was getting some funky phasing issues being on axis. I spent about 6 hours moving each set of speakers around, muting all the others, and searching for the center image. I found it. It turns out to be along the same aiming I had in my first iteration last year.

Good to know, tweet install is next up for my car... Today I just finished getting rid of my dash rattle. Its amazing how much of a difference .5sq ft of ensolite foam + .5sq ft of mat, + about 20" of electrical tape can do. It actually wasn't that hard getting dash off, once I realized I forgot the two bolts securing the airbag.

I know one thing, my tweet install is going to be much simplier than yours, and also look way more ghetto... but thats ok.