Causes of slightly more worn inside and outside edges?

[Viperoni]

FWIW guys, my race tires, which I do drive on the street a bit, have the same kinda wear.
-1.5* camber wears out the inner edge, and racing kills the outer edge.

OP, if you don't race teh car, it's either your inflation pressure or a very screwed up alignment lol

[Kaotic Lazagna]

Originally Posted by Viperoni

FWIW guys, my race tires, which I do drive on the street a bit, have the same kinda wear.
-1.5* camber wears out the inner edge, and racing kills the outer edge.

OP, if you don't race teh car, it's either your inflation pressure or a very screwed up alignment lol

Yeah, when I had my Falken Ziex 912's on my ADR rims, I always had them set to max psi (what ever it was on the sidewall, can't remember), and took on ramps and corners pretty quickly. I got 30k miles out of them before I decided to sell the rims and tires (probably still had at least 5k miles left on them), even wear all around on all four tires. Kept my alignment good and rotated my tires when ever America's Tire would remind me to.