how to change headlight bulbs? - Toyota Yaris Forums

bobolinko · 10-26-2012, 06:17 PM

Quote:

Originally Posted by TRDblueyaris

i took the front bumper off and the headlight cluster out. too much work for a light bulb. does anyone know what that peanut bulb under the main headlight bulb is for?

That is the Parking light bulb

#168 lamp

sickaroll · 11-13-2012, 03:36 PM

My wife's 2001 Yaris had an odd problem; offside sidelight and nearside dips were dead, but the beams were both fine.
On my Puma the enclosures are very similar, 3 screws, a good tug and they're off (no need to remove the bumper mind).

I was surprised to find only one large bulb in the headlights. I replaced both sidelights, and the two main bulbs (h4) with some extra-bright, while still road-legal ones. Now are 3 positions (side, dips, beams) work fine.

If the bulb was faulty, surely the beams shouldn't have worked?

Exiwolfman · 11-23-2014, 10:56 PM

Quote:

Originally Posted by bobolinko

That is the Parking light bulb

#168 lamp

194 bulb i use led 6000k and they look and work awesome .

nookandcrannycar · 11-24-2014, 12:33 AM

Changing the bulb without touching the bumper is all about hand size. The bulb has been replaced twice on each side on my 2007. Re the first replacement, I tore some skin trying to change the first one, until I realized my hand was too big. I took it to a local Toyota dealer, and I believe they charged me $16.00 to put the bulb in. I've also taken the car there for the last three bulb changes (all four times, I bought the bulb elsewhere) and they either didn't charge me for any of those three...or may have charged me $16.00 for one of the the three. Someone has always been available who has a small enough hand.

07liftback · 01-23-2015, 11:30 AM

Just got done changing my 07 Liftback's lights and I must say, it was taking forever as I initially gave up after the first 5 minutes. After a bit of research, I'm surprised no one posted any service manual pics on here of how the retaining clips worked. There was no need to pull the bumper cover and remove the headlights. My hands are relatively large and I too initially had an issue pulling the retaining clips together to release the headlight.

The bigger issue that wasn't mentioned here was the fact that the boot seal was seized onto the headlight bulb with the devil's grip. People on other forums said to use a screw driver to pry it off but I couldn't even get the screw driver angled correctly to pry the boot off.

What I did was I reached behind the boot cover and pulled one side of the retaining clip to release that side but had trouble releasing the opposite side. So I grabbed my house key and jammed it between the headlight housing and the other side of the retaining clip to release it.

Now all I had to do was pull the boot cover out with the attached headlight bulb.

This all took maybe 5 minutes total regardless of how lengthy the process may have sounded. I'll attach the pictures from the service manual on this post to show you guys how the retaining clips work as well as how to remove the bumper cover for those who choose to go that route.

Old&InTheWay · 11-05-2015, 01:22 AM

I could not get my hand anywhere near the bulb and was thinking of giving up when I found this video: https://www.youtube.com/watch?v=PlN6wC8hon4

I was a bit nervous to take apart the bumper, but it really was as easy as it looks in the video. Took about 20 minutes and all you need is a 10mm socket and maybe a flathead screwdriver. If you break a plastic clip because they are old and brittle (like I did) a zip tie does the trick just fine. Next time I need to do it it'll take 10 minutes.

11-13-2012, 03:36 PM	#2
sickaroll Drives: 2001 Yaris 1.0 Join Date: May 2010 Location: Dublin, Ireland Posts: 5	My wife's 2001 Yaris had an odd problem; offside sidelight and nearside dips were dead, but the beams were both fine. On my Puma the enclosures are very similar, 3 screws, a good tug and they're off (no need to remove the bumper mind). I was surprised to find only one large bulb in the headlights. I replaced both sidelights, and the two main bulbs (h4) with some extra-bright, while still road-legal ones. Now are 3 positions (side, dips, beams) work fine. If the bulb was faulty, surely the beams shouldn't have worked? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tutorial : Speaker Changing, Headlight Painting, Center Control Colour,Panel Removal	hasher22	DIY / Maintenance / Service	88	03-06-2014 07:40 AM
Changing Headlight Bulb Tutorial	RSboyz	DIY / Maintenance / Service	29	03-15-2007 02:35 PM
Yellow, Purple, Green Headlight BULBS?	jamal1984	Cosmetic Modifications (Exterior/Interior)	12	02-04-2007 09:30 AM
Side Turn Signal Lights	bigsky2	Cosmetic Modifications (Exterior/Interior)	15	08-24-2006 07:06 PM

11-24-2014, 12:33 AM	#4
nookandcrannycar Drives: 2('14+'07)MT 3d ,wHandCrWndws! Join Date: May 2009 Location: S.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles Posts: 4,839	Changing the bulb without touching the bumper is all about hand size. The bulb has been replaced twice on each side on my 2007. Re the first replacement, I tore some skin trying to change the first one, until I realized my hand was too big. I took it to a local Toyota dealer, and I believe they charged me $16.00 to put the bulb in. I've also taken the car there for the last three bulb changes (all four times, I bought the bulb elsewhere) and they either didn't charge me for any of those three...or may have charged me $16.00 for one of the the three. Someone has always been available who has a small enough hand.

11-05-2015, 01:22 AM	#6
Old&InTheWay Drives: 2008 Yaris S Hatchback Join Date: Feb 2015 Location: Denver, CO Posts: 4	I could not get my hand anywhere near the bulb and was thinking of giving up when I found this video: https://www.youtube.com/watch?v=PlN6wC8hon4 I was a bit nervous to take apart the bumper, but it really was as easy as it looks in the video. Took about 20 minutes and all you need is a 10mm socket and maybe a flathead screwdriver. If you break a plastic clip because they are old and brittle (like I did) a zip tie does the trick just fine. Next time I need to do it it'll take 10 minutes.